- Connect the LAN terminal at the back of the smart TV monitor and the router or the Internet terminal on the wall using a LAN cable.
- Select Wired Internet under Network and check if a connection is established normally.
- If you are to use a fixed IP, select Edit and modify the IP.
Try this
Smart TV monitor - How to set wired Internet automatically
1. Select Wired Internet Settings - [ Settings] button on the remote control → [
All Settings] → [
General] → [Network] → [Wired Network Connection (Ethernet)].
2. Select [Wired Network Connection (Ethernet)] → [Edit] →[ Set Automatically].
How to set wired network IP manually
1. Select [Wired Network Connection (Ethernet)] → [Edit] →[ Automatic Setting].
2. From [Edit], select an IP address and change it as you need.
3. Change the Subnet and the Mask/Gateway/DNS Server in the same way.
4. Once edit is complete, select Connect.
When network connection fails
- Check the Internet cables and router, and the Internet terminal on the wall for any abnormality.
- Pull out the Internet cable from the smart TV monitor and connect it to your laptop or PC to see if Internet connection is made.
- If you need to use a fixed IP, select the Wired Network to display a detailed list of items, select Edit and manually edit the items as follows.
- Check the [X]-marked items in every segment of the Connection Status.
Checking Network Connection Status segments for abnormality
• If abnormality is found in the [Smart TV Monitor – Gateway] segment : Check the LAN cable, the router, and the terminal on the wall for abnormality.
• If abnormality is found in the [Gateway - DNS] segment : Check the router and the terminal on the wall for abnormality.
• If abnormality is found in the [DNS - Internet] segment : This is an issue of Internet communication.
Contact your Internet Service Provider.
This guide was created for all models, so the images or content may be different from your product.
