Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help library

Find helpful information about your LG product

LG Air Conditioner Central Control - How to use the 16 room central control function controller

Troubleshooting



LG Air Conditioner Central Control - How to use the 16 room central control function controller


Function controller is a device that can be connected to the 16 room central controller to remotely control target temperature, wind volume and etc of each room.

Try this

central controller and functional controller

How to Control Indoor Units Using the Central Controller

1. Select an Individual Indoor Unit

  • Press the Individual Operation/Stop button on the central controller.

  • This allows you to turn ON or OFF that specific indoor unit.

  • The controller will show the status (ON/OFF) of the selected unit.

  • You can now adjust the operation mode, fan speed, and target temperature for that unit.


2. Select a Group of Indoor Units

  • Press the Simultaneous Operation button on the controller.

  • This turns ON all indoor units in that group at the same time.

  • The controller displays the status of the first indoor unit in the group and shows “Simultaneous Operation.”

  • You can now adjust the operation mode, fan speed, and target temperature for the group.


3. Select All Indoor Units

  • Press and hold the Simultaneous Operation button for 2 to 3 seconds.

  • This will turn ON all indoor units connected to the controller.

  • The controller displays the status of the first indoor unit connected to the master controller and shows “Simultaneous Operation.”

  • You can now adjust the operation mode, fan speed, and target temperature for all units.


4. Master Controller – Group Selection

  • Press and hold the Individual Operation/Stop button on the Master Central Controller for 2 to 3 seconds.

  • This will turn ON the group of indoor units linked to that button.

  • The controller shows the status of the first unit in that group and shows “Simultaneous Operation.”

  • You can then adjust the operation mode, fan speed, and target temperature for that group.

Example:

If you press and hold button #2 on the master controller for 2 to 3 seconds, the #2 group of indoor units will turn ON.

Group image of central controller remote control

This guide was created for all models, so the images or content may be different from your product.

*Required question