If your laundry is still too wet after a wash, or you just want to spin excess water out of hand-washed items, you can run a [Spin Only] cycle. Here's how to set it up.
Important
- Do not turn the dial or press any other cycle buttons immediately after turning on the washer.
- If a cycle is already selected, pressing the [Spin] button will only sound a beep and the washer will not start. If this happens, turn the washer off and back on, then start over.
Why you might need a [Spin Only] cycle
1. If your laundry is still too wet after a wash, or you just want to spin excess water out of hand-washed items
Use the [Spin Only] cycle to remove water quickly.
How to use the [Spin Only] cycle
Option 1: Models with a dedicated [Spin] button
- 1. Press the [Power] button to turn on the washer. Do not touch the dial at this point.
- 2. Press the [Spin] button on the right side of the control panel once. Press it repeatedly to select your desired spin speed (High, Medium, or Low).
- 3. Press the [Start/Pause] button to start the [Spin Only] cycle.
Option 2: Models with [Spin Only] printed below a button
- 1. Press the [Power] button to turn on the washer. Do not touch the dial at this point.
- 2. Press and hold the button marked with an asterisk (*), such as [Extra Rinse] or [Rinse+Spin], at the same time for at least 3 seconds.
- 3. Check that the wash and rinse times disappear from the display and only the spin time (e.g., 14 minutes) is shown.
- 4. Press the [Start/Pause] button to start the [Spin Only] cycle.
Option 3: Models where you select [Spin Only] from the dial
- 1. Press the [Power] button to turn on the washer.
- 2. Turn the dial to [Spin Only].
- 3. Press the [Start/Pause] button to start the [Spin Only] cycle.
Still need help?
If you've tried the steps above and the problem persists, you can get more support through AI Chat in the bottom right corner of the LG website, or by requesting a technician visit.
Note: A service fee may apply if your product is out of warranty.
FAQ
- Q. The displayed spin time (for example, 18 minutes) seems too long. Can I shorten it?
- A. The displayed time includes a balancing step. The drum rotates slowly to detect the load size and untangle your laundry. This prevents heavy vibration if the items are unevenly distributed. The actual high-speed spin is much shorter, so please allow the cycle to finish.
- Q. I turned the washer on and pressed the [Spin] button, but it only beeps and won't start.
- A. This happens because your washer defaults to the [Normal] cycle when you turn it on, and pressing other buttons can interfere with the settings. Turn the washer off and back on, then press only the [Spin] button. Do not touch the dial.
This guide is based on standard models. The settings menu may vary by model.
