Align the LG AeroCat Tower using the LG logo on the front as a guide.
When attaching the Cat Dome to the main unit, push it down until you
hear a click.
If the Cat Dome is not assembled correctly, the product will not turn on
even when plugged in.
How to assemble the LG AeroCat Tower step by step
Position the product facing you, then follow the steps below to assemble it.
-
1. Locate the LG logo on the main unit to identify the front.
-
2. Make sure the side of the Cat Dome with the status panel is facing the front (the same direction as the LG logo).
-
3. Insert the Cat Dome into the main unit. You will hear a click when it is properly attached.
Assembling the Cat Step
-
4. Locate the Cat Step (①) and the Cat Step Base (②).
-
5. Align the mark on the Cat Step with the “Unlock” mark on the Cat Step Base, then insert it.
-
6. Turn the Cat Step until it aligns with the “Lock” mark and clicks into place.
Securing the Main Unit to the Cat Step
-
7. Align the mark on the Main Unit with the mark on the assembled Cat Step Base, then gently press the main unit down into the Cat Step until you hear a click.
-
8. Carefully lay the product on its side, then fasten it securely using the Cat Step Set Fixing screws and the Main Body Fixing Screws.
(The 2 longer screws are for securing the Main Unit.) -
9. Once all screws are firmly tightened, place the Cat Dome cushion on the Cat Dome to complete assembly.
Caution
-
The product will not operate if the Cat Dome is not attached
correctly:
When attaching the Cat Dome to the Main Unit, push it in fully until you hear a click.
If the Cat Dome is not assembled correctly, or if only the Main Unit is plugged in without the Cat Dome attached, the product will not operate. -
Make sure the assembly direction is correct:
If the Cat Dome and the Main Unit are not aligned properly, do not force them together. This may cause a malfunction or damage the product. -
Assemble the product where you plan to use it:
The product may be heavy after assembly. For safety, we recommend assembling it where it will be used.
Frequently Asked Questions (FAQ)
- Q. I finished assembling the product, but it will not turn on.
- A. The most likely cause is that the Cat Dome is not fully attached to the Main Unit. Remove the Cat Dome, realign it using the LG logo as a guide, and press it in firmly until you hear a click.
- Q. The screws are different lengths. Which ones should I use?
- A. The two longer screws are used to secure the Main Unit. Use the shorter screws to secure the Cat Step.
- Q. The Cat Step does not turn easily.
- A. Make sure the "Unlock" mark on the Cat Step is precisely aligned with the "Unlock" mark on the Cat Step Base before inserting it. Once properly aligned, the Disc should turn smoothly to the "Lock" position.
This guide was created for all models, so the images or content may be different from your product.
