Help Library

Topic

  • Document Contents
    Repair
    [LG dryer] Bits of lint are stuck to the rubber seal (gasket) of the door
    [https://lg.com/support]There is a rubber seal (gasket) inside the door of the dryer that ensure tightclosing of the door. Bits of fluff or lint may be left hung on the gasket thatwere not discharged to the filter while drying.Causes and Sy...
  • Document Contents
    Troubleshooting
    [LG Front Load Washer] How Does the Steam Feature Work?
    Try this.---------If your washer supports Steam, the [Steam] option is available only on certaincycles. On those cycles, you can enable or disable the [Steam] option.(Features may vary by model.)Steam spray timing and temperature vary depen...
  • Document Contents
    Repair
    [LG dryer AI Dry] Instructions for using the AI Dry cycle.
    [https://lg.com/support]LG dryer - Instructions for using the AI Dry cycle.What is the AI Dry cycle?The AI cycle is a cycle that dries clothing to its optimal condition accordingto its characteristics. * This cycle detects the weight, mater...
  • Document Contents
    Troubleshooting
    [LG Styler dehumidification] I want to know how to use the Dehumidify cycle
    I want to know how to use the [Dehumidify] cycle.At a glanceIf you select [Dehumidify], it dehumidifies the room where the Styler isinstalled.Try thisHow to use the [Dehumidify] cycle1. Press the power button.2. Press [Gentle Dry] repeatedl...
  • Document Contents
    Troubleshooting
    [LG Dryer] Lint on the door gasket
    Causes and Symptoms------------------- * There is lint on the rubber gasket inside the door.Let's find out more.--------------------There is a rubber part (gasket) inside the dryer door that helps it open andclose smoothly. During drying, s...
  • Document Contents
    Troubleshooting
    [LG Washer Dryer] Is the vent pipe bent or clogged?
    Is the dryer vent pipe bent or clogged?---------------------------------------Follow These Troubleshooting Steps * Check the filter. If the filter is filled with lint or dirt, clean the filter and restart the dryer. * If the “Clogged” messa...
See More