Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help library

Find helpful information about your LG product

[LG TV No Signal] I am getting a No Signal message on my screen

Troubleshooting

If there is no signal input to the TV, the [No Signal] message appears.

no signal image on screen

Causes and Symptoms

  • The TV input mode has been changed.
  • The external device connection is bad.
  • The broadcast signal is weak.

Try this

Have you checked the input mode?

➔ Press the External Input button on the TV remote to change the external input mode.

  • Watching cable TV

Press the External Input button on the TV remote and select the current broadcasting program.

Select external input after pressing the external device button on the remote control

Using an external device

Did you check the cable connected to the device?

➔ If the cable connected to the external device is not in good condition, the No Signal message may appear.

  • Reconnecting the HDMI cable

Turn off the power of the TV and external device, disconnect the HDMI cable on the back of the TV, and reconnect it.
Also, remove the HDMI cable from the external device and reconnect it, if feasible.
It is recommended to use an authentic HDMI cable to connect your TV with the external device. (Version 2.0)

How to connect tv and hdmi
  • Reconnecting the Component cable

If the external device is connected via a Component cable, reconnect the green, blue, and red cables.

External device component cable connection terminal

※ An HDMI cable is preferred to a Component cable, as it offers superior picture quality and ease of connection.

Wait! Here are more tips!
If the set-top box is turned off, the “No Signal” message appears on the TV screen.
Check if the set-top box is on.
Set-top box errors may result in the “No Signal” message even when the device is powered on.
Turn off the power switch on the back of the set-top box, wait for 5 seconds, and turn it on again.
The power switch on the back of the set-top box

Using a cable or master antenna TV

Still seeing No Signal after changing the channel?

➔ Run Auto Channel.

Press the setting button on the TV remote and select [All Settings] → [Channels] → [Channel Search] → [Auto Channel] → [Start].

① Turn on the TV and press the [Settings] button on your TV remote.

② Select [All Settings] in the [Settings] menu.

After pressing the remote control settings, select the All Settings menu

③ Select [Channel Search] in [Channels].

④ Select [Auto Channel] in [Channel Search].

Automatic channel selection in channel search

⑤ When the channel search is complete, check the number of discovered channels.

Channel search completed

If there are no or only a few channels discovered, please contact your property management office or broadcast service provider.

This guide was created for all models, so the images or content may be different from your product.

*Required question