To use the automatic ice maker and water dispenser, you must connect
your LG refrigerator to your home’s cold water supply.
For a safe installation, first unplug your refrigerator and connect a
compatible water supply line.
Once connected, check all connections for leaks, and make sure to flush
the water line before using the water or ice.
- Unplug your refrigerator before connecting or handling the water supply line.
- After installation, check the connections at your refrigerator and water shutoff valve for leaks to prevent water damage.
- If you use copper tubing, install it indoors where the temperature stays above 0°C (32°F) to prevent freezing and bursting.
- Connect the automatic ice maker to a cold water supply with a pressure between 20 and 120 psi.
- You may need a separate adapter depending on your home’s plumbing.
- If you need to use your refrigerator before connecting the water line, turn off the automatic ice maker.
Why Does the Refrigerator Need a Water Supply Line?
The automatic ice maker and water dispenser on your LG refrigerator use
water directly from your home’s plumbing.
To use these features, connect the refrigerator to a cold water supply
with a water supply line.
If the water line is not connected, your refrigerator cannot dispense
water or make ice.
How to Connect the Refrigerator Water Supply Line
Step 1. Connect the Water Supply Line to the Shutoff Valve
Connect a standard 1/4-inch water supply line to your home's cold
water shutoff valve.
If the line does not fit the valve, use a compatible adapter.
Step 2. Flush the Water Supply Line
Place the end of the water supply line in a large bowl or
container.
Open the water shutoff valve.
Let the water flow through the line until it runs clear to remove dust
and debris.
Close the water shutoff valve.
This removes dust and debris from inside the line before you connect
it to the refrigerator.
Step 3. Unplug the Refrigerator
Unplug your refrigerator from the wall outlet before you continue.
Step 4. Locate the Water Line Connection
Find the water inlet connection near the lower back of the
refrigerator.
The location may vary by model.
Step 5. Connect the Water Supply Line to Your Refrigerator
Remove the plastic protective cap from the refrigerator water
valve.
Slide the provided compression nut and ferrule onto the water supply
line.
Insert the end of the water supply line into the refrigerator
connection as far as it will go.
Tighten the compression nut until the connection is secure.
Step 6. Open the Water Valve and Check for Leaks
Open the water shutoff valve.
Check the connection at the refrigerator for leaks.
Check the connection at the water shutoff valve for leaks.
If a connection leaks, close the water shutoff valve and tighten the
compression nut until the connection is secure.
Step 7. Plug In the Refrigerator
After confirming that no water is leaking, plug the refrigerator into the wall outlet.
Step 8. Flush the Refrigerator Water System
Dispense and discard at least 7.5 L (2 gal) of water to flush the water lines inside your refrigerator.
Step 9. Still Need Help?
If you need more help after completing the steps above, contact us through the LG Chatbot on the LG website or request a technician visit.
Frequently Asked Questions (FAQ)
- Q. Why Isn’t the Ice Maker Producing Ice Immediately After Installation?
-
A. After installation,
your refrigerator needs time to cool and supply water to the ice
maker.
It may take up to 24 hours to produce the first batch of ice.
- Q. Can I Drink the Water Immediately After Installation?
-
A. Do not drink the
first water dispensed after installation.
Dispense and discard at least 7.5 L (2 gal) of water to flush dust and debris from the new water supply line and your refrigerator's internal lines.
- Q. What Happens if the Water Pressure Is Too Low?
-
A. If your water
pressure is below the recommended range of 20 to 120 psi, your ice
cubes may be smaller.
The water dispenser may also operate more slowly than usual
This guide is based on standard models. The settings menu may vary by model.
