Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help library

Find helpful information about your LG product

[LG washing machine installation] [Mini Washer] I am curious about the installation/disassembly sequence when moving out.

Troubleshooting

Product installation and disassembly should be done by an LG Electronics service technician
The installation and disassembly methods shown below are simply information designed to help customers understand the process.

Try this

1. The product must be moved by a group of two. When using a cart, be sure to lay a heavy floor protection mat to protect the floor.

2. Initially, move the product only to the front of the final installation site.

3. Check if the 4 legs of the front load washing machine are completely locked.
Check if the legs of the front load washing machine are completely locked.
(If not completely locked, it cannot be assembled to the Mini Washer.)

Make sure the leg is locked

4. Prepare the Mini Washer in the space where it will be installed, and place the front load washing machine on top of the Mini Washer.

Make sure the leg is locked

5. In order to assemble the front load washing machine to the Mini Washer, securely fasten the 4 screws in each corner, a total of 16 screws.

Screw on each corner
Warning!

If the screws are not fastened correctly, vibration and noise that will not be obvious during installation may occur during machine use, which may cause accidents and safety breaches such as product overturning. Therefore, the screws must be fastened securely.

6. Connecting a water supply hose

Connect the drum washing machine on top, the faucet on the middle, and the water hose on the mini wash on the bottom
Warning!

Connect the cold water hose of the front load washing machine to the COLD faucet correctly.

7. Connecting a drain hose

Install the provided drain hose to face up.
Be sure to fasten the clamp at the end.
Connect the drain hose of the front load washing machine and the Mini Washer to the provided drain connector.

Drum washer and mini wash drain hose to drain connector

8. Leveling

Level the product using a level and leg stoppers as necessary. (Use a jig for leveling)
Level the product and attach a non-slip sheet at the bottom of the 2 front legs.
Level the product by loosening the bottom legs in the direction of vibration increased when pushing the front left and right sides diagonally in the spin mode.

Adjust the horizontal with a jig and use a height adjustment plate and a non-slip sheet
Warning!

Use a non-slip stopper or tape if the floor is slippery.

This guide was created for all models, so the images or content may be different from your product.

*Required question