Below is a guide to installing the washer under a countertop.
We advise you to contact a technician for washer installation.
If you choose to install the washer yourself, please remember to wear safety gloves.
If the washer is too tall for the counter height, you will need to remove the top plate of the washer and then assemble the top cover accessory.
Try this.
1. Removing the top plate from the washer
- Disconnect the power plug. Remove the two screws located at the upper rear of the washer.
- Remove the top plate by lifting it up.
2. Assembling the top cover accessory
-Remove the holder screws from the top of the unit. Position the top cover accessory where the holder screws were removed.
-Secure the accessory by tightening nine screws through the holes.
3. Once assembly is complete, carefully push the washer back into place.
Please refer to the table below and purchase the correct accessory from the LG Electronics website or an authorized LG service center.
This guide was created for all models, so the images or content may be different from your product.
