Try this
Stacking kit (angle) installation conditions
1. Make sure to secure enough space for the stacked installation.
The universal stacking kit can be installed in series, regardless of the dryer or the front load washing machine model.
However, the serial installation for the dryer and washing machine requires space that is 83 cm wide by 220 cm high.
(The height can be adjusted by up to 10cm.)
2. Installation of an angled rubber leg is required.
If the floor is uneven, a rubber leg installation is necessary.
(The rubber legs can reduce noise/vibration during operation.)
3. If the wall is plasterboard, installation is not possible.
Installation using rubber legs
If the front of the washer hovers in the air due to the unevenness of the floor, it should be installed with a rubber leg that is used as an SVC part of the washing machine.
The default legs can also be adjusted in height, but it can cause noise/vibration, so be sure to utilize the rubber legs for installation if there is any unevenness in the floor.
The maximum number of rubber legs permitted is 3. (This also applies to washing machine installations.)
If the wall is plasterboard
The universal StackingKit installation is not possible if the wall is made of plasterboard.
(Product vibration occurs if the wall fixing bracket is not used.)
This guide was created for all models, so the images or content may be different from your product.
