Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help library

Find helpful information about your LG product

[LG CordZero R9] I hear the voice error message ‘Check if there are foreign objects on the rotating brush on the bottom’

Troubleshooting

※ The error message may be different from the actual message you hear from the product.

Try this

① Before cleaning the rotating brush, remove the dust bin to make sure that internal dusts do not fall out from the dust bin.

② Place a soft cloth on the floor and place the roboking upside down and press the Separate button on the left for the nozzle to separate the rotating brush cover.

Turn the product over and press the button on the left side of the inlet to remove the rotating brush cover.

③ While pressing down the Separate lever for the rotating brush, grab the rotating brush upward and remove it.


While pressing the rotating brush release lever, hold the rotating brush upward and remove it.

④ After removing foreign objects wrapping around the rotating brush(hair, dust and etc), firmly assemble it until you hear the clicking sound in the rotating brush cover.


Assemble after removing foreign matter from the rotating brush
Warning!

Do not soak the rotating brush in water for cleaning.
It can cause a corrosion to the bearing that is responsible for rotating the rotating brush.

This guide was created for all models, so the images or content may be different from your product.

*Required question