Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help library

Find helpful information about your LG product

[LG Robot Vacuum Cleaner] The remote control does not operate

Troubleshooting

During charging, the [Repeat Cleaning] button on the remote control does not operate.
※ Smart diagnosis and time setting button work during charging only.

Display repeat cleaning button on remote control

Try this

Has it been too long since you last used the remote control?

➔ Replace the battery inside the remote control.

Wait! Find out more.

How to mount the batteries in a remote control

1. On the rear of the remote control, press the hook to open the battery cover.
2. Insert two units of AAA batteries after checking the polarity.
3. Completely close it to make sure the battery does not slip out.
Check the direction of inserting the batteries on the back of the remote control.

Hasn’t it been too long since you replaced the battery last time?

➔ If the robot vacuum cleaner locking device is enabled, the remote control will not work.

Wait! Find out more.
Press the [Turbo] and [Mode] buttons at the same time for more than 3 seconds.
Press the turbo button and mode button at the same time for 3 seconds.

This guide was created for all models, so the images or content may be different from your product.

*Required question