A non removable/window type air conditioner is installed by customers themselves.
Try this
1. After placing the product in the installation location, then make sure it protrudes toward the indoor side by 110 to 180mm.
2. Firmly fix the product to make sure it does not fall toward the outdoor unit side.
To ensure that the condensed water can be smoothly drained toward the backside, make sure that the rear of the air conditioner is tilted downward by about 10 to 15mm.
During product installation, if there is no tilt in the rear, then condensed water can overflow to indoors, thus causing electrical shocks, fire, property damages and so on.
3. After fixing the product, block the gap near the wall or the product with insulation material provided in the package.
Move left or right to check the contents.
This guide was created for all models, so the images or content may be different from your product.
