If the auto drying function is enabled, then as well as showing the auto drying signs [SC] or [Co], even if
you turn off the power, the indoor unit might continue to operate for some time.
Check if the auto drying function is enabled.
What is automatic drying function?
The auto drying function starts when stopping the mode.
Once the auto drying function starts, the air-conditioner runs in fan mode for a certain duration to remove moisture from the evaporator.
Moisture plays a role of habitable bed for molds and bacilli, and it is recommended to use the auto drying function to keep the air-conditioner clean.
Drying status of inside of the air-conditioner may vary depending on temperature and humidity of indoor air.
Once the auto drying function starts, the air-conditioner runs in fan mode for a certain duration to remove moisture from the evaporator.
Moisture plays a role of habitable bed for molds and bacilli, and it is recommended to use the auto drying function to keep the air-conditioner clean.
Drying status of inside of the air-conditioner may vary depending on temperature and humidity of indoor air.
Display of auto drying on LED lamp type
Status: [Co] is displayed on the display window of the product.
Auto drying time: product off after 10 minutes of operation.
Display on remote control screen
➔ The auto drying function is displayed on the remote control screen once the function is set.
Note
The auto drying function may not run, and the product may be turned off if mode of the product finishes
in the stopping reservation, or the sleeping reservation completion mode.
This guide was created for all models, so the images or content may be different from your product.
