Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help library

Find helpful information about your LG product

[LG Air Conditioner Error Code][Portable/Window] The display window shows Co. The product is not powered off

Troubleshooting

If the AUTO CLEAN function is enabled then as well as showing the AUTO CLEANsigns [Co], even if you turn off the power, the indoor unit might continue to operate for some time.
Check if the AUTO CLEAN function is enabled.

displayed when AutoClean is operating

AUTO CLEAN function

The AUTO CLEAN function starts when stopping the mode.
Once the AUTO CLEAN function starts, the air-conditioner runs in fan mode for a certain duration to remove moisture from the evaporator.
Moisture plays a role of habitable bed for molds and bacilli, and it is recommended to use the AUTO CLEAN function to keep the air-conditioner clean.
※ Drying status of inside of the air-conditioner may vary depending on temperature and humidity of indoor air.

Display of AUTO CLEA Non LED lamp type
Status: 'Co' is shown on the product display.
AUTO CLEAN time: product off after 10 minutes of operation.

➔ Display on remote control screen

The AUTO CLEAN function is displayed on the remote control screen once the function is set.

showing Auto Clean on the remote control
Note
The AUTO CLEAN function may not run, and the product may be turned off if mode of the product finishes in the stopping reservation, or the sleeping reservation completion mode. Exact operability of the product can be checked by the product model name and you are recommended to receive necessary information from a professional consultant.

This guide was created for all models, so the images or content may be different from your product.

*Required question