Try this
Cleaning the dust sensor for the combined [master bedroom] wall mounted type air conditioner
1. Checking the location of the [PM 1.0] dust sensor for the wall mounted air conditioner with air purification
Even if it is the product with the same design, depending on the model, there can be a sensor or not.
| Classification | Voice recognition function applied alone |
Air purification function applied alone |
Voice recognition + air purification functions applied at the same time |
|---|---|---|---|
| Product |
|
|
|
| Function applied(Y/N) / Location |
① Voice recognition application location : right side |
② Dust sensor application location : right side |
① Voice recognition application location : right ② Dust sensor application location : left |
Move left or right to check the contents.
2. Checking the location of the dust sensor lens
It says 'PM1.0 SENSOR'.
Open the sensor cover.
Dust sensor lens is found at 10’o clock inside the product.
3. Cleaning the lens
Put a little water on a cotton swab to wipe the Wipe the, and wipe away any remaining moisture with a dry cotton swab
Note
For your information, in case of dusts containing oil, due to the formation of oil layer, if you wipe it
off with just water, then you might end up making the lens surface dirtier.
In this case, use cotton ball slightly soaked in alcohol.
In this case, use cotton ball slightly soaked in alcohol.
This guide was created for all models, so the images or content may be different from your product.
