ADD TO WISHLIST

NEW
LG 13kg Smart Inverter top load washing Machine with Smart Diagnosis™, 2024

Key Features

See Retailer for Pricing

Limited Quantity Sale

Available QTY 0
  • vip-price-message
    (T1388NEHV2)
    AED
    AED
    LG Members Price
Total

component-OBScountrySelectDesc

See Retailer for Pricing

Limited Quantity Sale

Available QTY 0
  • vip-price-message
    (T1388NEHV2)
    AED
    AED
    LG Members Price
Total
LG 13kg Smart Inverter top load washing Machine with Smart Diagnosis™, 2024
*Washing Machines have Five Years Warranty, Direct Drive Motor has ten years Warranty, Dryers has five years Warranty
**Product Shelf Life time is 7 years
  • Auto Restart

    Auto Restart

    When a washing machine is turned off due to power failure, it will restart automatically from the position it stopped to adjust accordingly.

  • Standby Power Save

    Standby Power Save

    Even if the power cord is plugged in while power is off, only extremely little electricity will run through the washer. You don't need to worry about wasted electricity.

*Normal cycle starts after 8-min. of pre-washing.

FAQ

Q.
Why is my laundry covered with dust and lint?
A.
1. Dust generated during washing is filtered through a cleaning filter. If the cleaning filter is full, the dust may not be filtered out properly. The cleaning filter can be manually cleaned before every wash to prevent the machine from leaving dust and lint on clothes.
2. Separate your colored and white clothes from your black and lint-producing clothes. Wash them in different loads to further prevent unwanted dust and lint in your laundry.
Q.
[IE] What should I do when I encounter this error?
A.
1. It occurs when the washing container is not filled with water for a certain period of time.
2. Check if the faucet is locked or the water hose is not connected.
3. Check if the water supply hose is pressed or bent.
4. Please check if the water supply hose is frozen because of the cold weather.
Q.
[OE] What should I do when I encounter this error?
A.
1. If the drain hose is twisted or bent, or if the drain hose is installed too high, the water flow may be interrupted and the water may not drain well. In this case, make sure that the drain hose is not more than 6 cm off of the floor and arrange it so that the bottom of the hose falls evenly, without obstruction.
2. Make sure that the drain hose is not blocked with dust or other substances.
3. Check if the drain hose has frozen due to cold weather.
Q.
[dE] What should I do when I encounter this error?
A.
If the valve where the source water is supplied or the dispense valve of the faucet is closed, the water pipe sterilization and water outlet sterilization features will not work. Please open the source water valve or the dispense valve.
Q.
How do I register my ThinQ products?
A.
1. Make sure that both your product and internet router are turned on.
2. Bring your product close to the internet router. If the distance between the product and the router is too far, the signal strength can be weak and it may take a long time to register your product.
3. Install the ThinQ application. Please refer to the page relevant to your country for further instructions on installing the ThinQ application and registering your product.
What people are saying

Compare

0