How to Set Delay End
-
1. Load your laundry and add detergent or fabric softener to the washing machine, then close the door.
-
2. Press the Settings button on the control panel.
-
3. Use the arrow buttons to navigate to Delay End , then press OK .
-
4. Select your desired delay time using the arrow buttons, and press OK to confirm.
-
5. Press the Prev button to return to the cycle screen, then press Start .
-
6. The machine will start, close the door, weigh your laundry, and display the set delay time.
Storage function
If you don't plan on taking the clothes out of the Styler immediately the cycle is completed, use the Storage function to keep them dry.
How to use the Storage function
Press the Cycle button to select the cycle you want, then press the Sterilize button for 3 seconds to set the Storage function.
Depending on the product, the button to select the Storage function may vary. The Storage function cannot be used for the Indoor Dehumidification cycle.
The Storage function is operated automatically after completing the selected cycle and operates for up to 24 hours.
The Storage function performs a drying cycle that heats the air every 45 minutes to keep the clothes dry, so periodic operation noise will be evident.
Rest assured as it is not a product defect. 3. Use the arrow button to move to Delay End, and then press OK.
If you change to another cycle after you have set Delay End, you will have to set it again.
This guide was created for all models, so the images or content may be different from your product.
