8 Kg Vivace Washing Machine, with AI DD technology

*Washing Machines have Five Years Warranty, Direct Drive Motor has ten years Warranty, Dryers has five years Warranty
**Product Shelf Life time is 7 years

WD-Vivace-V900-VC2-BlackSteel-01-2-Vivace-Intro

Intelligent Care with More Fabric Protection

AI DD™

Intelligent Care with 18% More Fabric Protection

Based on big data of accumulated washing experience, AI DD™ offers the most Optimized washing motion in order to care your laundry.

*Tested by Intertek on March 2019. Cotton cycle with 2kg of underwear compared to LG Conventional Cotton cycle(F4V9RWP2W vs. FC1450S2W). The results may be different depending on the clothes and environment.
*AI DD is available in 3 cycles.(Cotton, Mixed Fabric, Easy Care).

What is AI DD™?

The AI DD™ detects not only the weight, but also senses softness of fabric, and it chooses the optimal motions for the fabric by itself.

99.9% Allergen Removal

Allergens reduced up to 99.9% by Steam.

*Allergy Care cycle approved by BAF (British Allergy Foundation) reduces 99.9% house dust mite allergen.
The results may be different depending on the environment.

Bigger Capacity

Bigger Capacity in the Same Space

Get bigger drum capacity in same size!

Design

More Visible and Elegant

Made a more visible display and increased the knob size with a metallic finish.

*TWINWash™ mini may not be available in all country or in all local retailers.

Why is my laundry covered with dust and lint?

1. Dust generated during washing is filtered through a cleaning filter. If the cleaning filter is full, the dust may not be filtered out properly. The cleaning filter can be manually cleaned before every wash to prevent the machine from leaving dust and lint on clothes.
2. Separate your colored and white clothes from your black and lint-producing clothes. Wash them in different loads to further prevent unwanted dust and lint in your laundry.

[IE] What should I do when I encounter this error?

1. It occurs when the washing container is not filled with water for a certain period of time.
2. Check if the faucet is locked or the water hose is not connected.
3. Check if the water supply hose is pressed or bent.
4. Please check if the water supply hose is frozen because of the cold weather.

[OE] What should I do when I encounter this error?

1. If the drain hose is twisted or bent, or if the drain hose is installed too high, the water flow may be interrupted and the water may not drain well. In this case, make sure that the drain hose is not more than 6 cm off of the floor and arrange it so that the bottom of the hose falls evenly, without obstruction.
2. Make sure that the drain hose is not blocked with dust or other substances.
3. Check if the drain hose has frozen due to cold weather.

[dE] What should I do when I encounter this error?

If the valve where the source water is supplied or the dispense valve of the faucet is closed, the water pipe sterilization and water outlet sterilization features will not work. Please open the source water valve or the dispense valve.

How do I register my ThinQ products?

1. Make sure that both your product and internet router are turned on.
2. Bring your product close to the internet router. If the distance between the product and the router is too far, the signal strength can be weak and it may take a long time to register your product.
3. Install the ThinQ application. Please refer to the page relevant to your country for further instructions on installing the ThinQ application and registering your product.