At a Glance
When setting up your LG TV using an over-the-air antenna, you must program these channels into the TV. There are two ways of programming channels into your LG TV; you can choose to have the television detect the available channels in your area automatically, or you can manually enter channels yourself. Both methods require use of your LG TV remote control.
An digital over-the-air antenna would be required to gain access to the local channels in your area.
Try This
Auto Tuning
1Install an antenna in a location where it can receive a UHD signal and connect it to the UHD TV port on the back of the TV.
2Press the [Settings] button on the remote control.From [Settings], select [All Settings].
3Select [General] then Select [Channels].
4Select [Channel Tuning].
5Select the [Auto Tuning] and select [Start].
6When searching for channels is completed, select [End].
The list of available channels will vary depending on signal strength
Manual Tuning
1Install an antenna in a location where it can receive a UHD signal and connect it to the UHD TV port on the back of the TV.
2Press the [Settings] button on the remote control.From [Settings], select [All Settings].
3Select [General] then Select [Channels].
4Select [Channel Tuning].
5Select [Manual Tuning] then select [Signal Type] and search for the [Missing Channel Number].
6Once located, select [Add].
If signal strength or quality is below 80%, it is recommended to reposition the antenna to improve the signal.
How to activate/deactivate LG Channels?
- WebOS 3.0 - Settings → Channels → LG Channels → Toggle On/Off
- WebOS 3.5 - Settings → Channels → LG Channels → Toggle On/Off
- WebOS 4.0 - Settings → Channels → LG Channels → Toggle On/Off
- WebOS 4.5 - Settings → Channels → LG Channels → Toggle On/Off
- WebOS 5.0 - Settings → Channels → LG Channels → Toggle On/Off
- WebOS 6.0 - Settings → Support → Privacy & Terms → User Agreements → LG Channels Service
- WebOS 22 - Settings → Support → Privacy & Terms → User Agreements → LG Channels Service
