Clean the ultra-fine filter, or replace the filter upon regular basis according to the management method of the filter.
Try this.
1. Set target temperate at lower value to run the product in the cooling mode.
2. Make use of [Fan Mode] or [Auto Drying] function before stopping use of the air conditioner to dry the indoor heat exchanger for 10 minutes or longer.
3. Clean the ultra-fine filter, or replace the filter upon regular basis according to the management method of the filter.
4. If intense odor is smelled, turn the product off, and remove the filter, and dilute citric acid in the ratio of water (1000㎖)
(0.26gal)
and citric acid (3g)
(0.10oz) in the market and spray the diluted solution sufficiently bon the indoor heat exchanger.
Then, set the cooling mode at 18℃
(64.4℉), and run the air conditioner for 20 to 30 minutes.
Odorous particles and impurities inside the product are washed by citric acid solution and condensed water out of the product to reduce odor.
Do not use air conditioner cleaning agent, cleaning solution, or fragrant deodorant from the markets.
Failure to do so may damage the product or worsen the odor.
Product overhauling and washing service at the service center is charged service.
Service technician gives you a visit to diagnose the product, and performs washing services in steps depending on contamination level.
Costs may vary depending on cleaning work and contamination level including simple filter cleaning, non-overhauling washing, washing overhauled fan,
and washing fully overhauled product.
This guide was created for all models, so the images or content may be different from your product.
