[2024] 1.0HP Dual Inverter Premium Air Conditioner with Ionizer and ThinQ™ Function

The difference between inverter air conditioners and non-inverter air conditioners is the control of the compressor operating speed.
Non-inverter air conditioners have compressors working at the same speed regardless of indoor temperature, turning off when the desired temperature is reached and turning on again when the temperature rises. Inverter air conditioners operate by adjusting the compressor speed faster at higher temperatures and slower at lower temperatures.

For clean wind and strong performance, the filter needs to be cleaned every two weeks. Wash the filter with lukewarm water or use a neutral detergent for more stubborn dirt. After washing with water, dry the filter in the shade away from direct sunlight. You can use Auto Cleaning1) function for more convenient air conditioning management that automatically dries the AC interior when you turn it off2)3).
1) Initial Auto Cleaning setup requires the remote control. Check the manual included with the product for details.
2) If you turn off the unit, the fan continues to run for 30 minutes.
The function is set to off when shipped from the factory.
The function may be change without notice, Please check the manual enclosed with the product for details.
3) Depending on the country/model, there may be no Auto Cleaning function.

You can save energy by selecting appropriate temperatures when cooling and heating and by regularly cleaning the filters to reduce unnecessary energy wastage.
It is recommended to set air conditioner to 25℃ for cooling and 21℃ for heating.

There are two main types of air conditioners: Split air conditioners, Duct-free air conditioners. Split air conditioners require professional installation and Duct-free air conditioners(Window ACs, Wall type ACs, Portable ACs, etc.) don’t require duct installation since they are built-in outdoor units. Split type air conditioners must be installed by a professional engineer because the installation process requires drilling through walls to connect outdoor and indoor units, and electrical wiring work.