Help library: [LG dryer installation] [Wash Tower] I want to know how to install/disassemble the product when I move| LG PH

Product installation and disassembly should be done by a professional LG Electronics service technician. The installation and disassembly methods shown below are simply information designed to help customers understand the process. Preparations for washing machine installation Moving the washing machine within the house 1. The product must be moved by a group of two. When using a cart, be sure to lay a heavy floor protection mat to protect the floor. 2. Move the product only to the front of the final installation site. ※ You need to prepare a free space for installing the dryer and the stack. Install the roller stack guide. 1. Install the roller stack guide to the upper panel frame of the washing machine. 2. Ensure that the display cable of the washing machine is fixed on the panel frame. Wait! Here are more tips The roller stack guide is a piece of equipment that is provided to the shop’s service technician. Failure to use of the roller stack guide may cause injury or product damage. When you install the main roller stack guide, be careful not to compress the power connection cable of the washing machine and not damage the surface of the cable. Preparations for dryer installation Remove all four leveling legs from the dryer. If the leveling legs are not removed, you cannot stack and fix it on the washing machine. Ensure that they are removed. ※ Note that all screws are fastened by turning clockwise, and loosened by turning anticlockwise, except the screws for the rotating body. Warning! Always work in groups of two. Be careful to avoid having your hand caught in the bottom of the dryer. Be careful to avoid injury when you remove the leveling legs. Be careful to avoid scratching or damaging the surface of the product. Use of a tool such as pliers may damage the product. Use it for the first half turn to loosen the legs and then use your hands to complete the removal. Stacking Install the dryer over the washing machine. 1. Lift the dryer by holding the handle at the back of it. Warning! Be careful not to be injured by the corner of the panel frame projected over the washing machine while stacking. (Wear a glove or a wrist protector.) 2. Pull it forward so that the dryer is located in its position. Warning! Be careful to avoid the control panel connection line from getting caught in the frame of the washing machine. 3. Fix the product. ① Match the groove in the panel frame with that in the lower front of the dryer. ② Locate the grooves and fasten them with two screws on both sides of the front. ※ Screw fastening torque: 30 kgf.cm (2.94 N.m) Warning! Be careful not to be injured by contact with the sharp edges of the panel frame of the washing machine. Firmly fasten the screws. (Fasten the screws to the above mentioned torque levels.) Be careful not to use too much torque when you use a screw driver. (When you use an electric screw driver, check the torque step by step and find the optimal torque for fastening the screws.) Be careful not to cause scratches or damage to the surface of the product by a misguided screw driver tip. 4. Connect the drain hose of the dryer and fasten the clamp that came with it. ※ Tools: long-nose pliers Caution: Push the hose completely in following the direction of the arrow. 5. Assemble the stack bracket at the back with the screws that came with it. ① Firstly fasten the 5 screws, except where X mark exists on the right. ② Use the 2 screws removed from the dryer as well as the 3 screws provided. Connecting the water supply hose Connect the cool water supply hose (T type) for the washing machine and the water supply hose for the dryer. Connect the cool water supply hose (T type) for the washing machine and the water supply hose for the dryer. Warning! Install the water supply hose ensuring that it is not folded or twisted. (An IE error may occur when water supply fails.) Never loosen the existing fastened screws for fixing the drain hose of the washing machine. (Loosening the screws for fixing the drain hose at the back of the product will cause water to drain and subsequent continued supply of water, leading to an IE error.) Assembling the control panel Connect the washing machine connector and the dryer connector to the control panel. ※ Ensure that you connect the 9-pin connector to the 9-pin socket, and the 10-pin connector to the 10-pin socket. Turn off the power and place the control panel at the center of the washing machine and the dryer. Firstly, install the lower front center by pressing and holding it down, and install the 3 positions at the top by pressing them. (Follow the order of installation ① to ④.) Gently pushing the front side, fasten the screws on both sides. ※ Screws to use: Φ4 TAPTITE screws Warning! When you assemble the display panel, be careful not to have the connector lines caught in between the structures. Do not knock or strike the panel hard when assembling the control panel onto the product. This may cause scratches or damage to the surface of the product. After fastening the screws, close the caps on both sides. Warning! Firmly fasten the screws. Be careful not to use too much torque when you use a screw driver. (When you use an electric screw driver, check the torque step by step and find the optimal torque for fastening the screws.) Be careful not to cause scratches or damage to the surface of the product by a misguided screw driver tip. Moving the product to its final location Move the washing machine with the stack assembled to the place where it is to be installed and use it. Before you move it, wrap the product with a protective cover to avoid damage to the product surface by fittings and/or equipment around it. The combined weight of the product is about 150 kg. Place a thick blanket on the floor under the leveling legs before moving it. Warning! Be careful not to damage the floor when you move the machine. Personal injury may occur if the product is tipped over during movement. Ensure that at least two persons move the product whilst assuming a stable posture. This guide was created for all models, so the images or content may be different from your product.

Telephone	WhatsApp	Email us
For Consumer Electronics Product LTV, PTV, CRT, Monitor, Audio (HT/DVD/Bluray), Refrigerator, Residential Aircon, Washing Machine & Mobile Phone Call an LG Support Representative at Manila : (02)7902-55-44 Domestic Toll Free : 1-800-10-640-2525 (PLDT) 1-800-8-902-55-44 (GLOBE) * Monday to Sunday: 8am to 8pm For Commercial Air Condition Multi V, Ceiling Concealed Duct, Ceiling Cassette, Floor Standing, Ceiling Suspended, Chiller, Multi F Call an LG Support Representative at	If you prefer, add the number below to your smartphone contacts: 277924504 Or Scan the QR code:
Manila : (02)7902-55-55 Domestic Toll Free : 1-800-8-902-55-44 (GLOBE) * Monday to Sunday: 8am to 8pm For B2B Product Digital Signage, Large Format Display (LFD), Video Wall, Media Player, Hotel TV & Commercial Washing Machine Call an LG Support Representative at Manila : (02)7902-55-45 Domestic Toll Free : 1-800-8-902-55-44 (GLOBE) * Monday to Sunday: 8:00am to 8:00pm

[LG dryer installation] [Wash Tower] I want to know how to install/disassemble the product when I move

Article feedback