Try this
Controlling the wind angle of the ceiling mounted type air conditioner with a wired remote controller
1. Press the [Function Setting] button on the wired remote controller.
2. Press the [Left/Right] button to select a louver number.
Each time you press the button, the louver number toggles in the order of: [1] → [2] → [3] → [4] →
[All] → [Standard].
3. Select the [Left/Right] button to move the selected louver.
Now, select [All] to set all the louvers’ angles selected at the same time.
4. Select [Standard] to select the factory shipping setting where the wind angle does not change.
5. Press the [Left/Right] button to adjust the louver angle as well.
After the pre heating/defrosting is completed, it will once again operate at the angle that was set.
Vane angle control function is an additional function and some products do not support it.
This guide was created for all models, so the images or content may be different from your product.
