New Therma V Solutions are Custom Made for a Changing Market

R32 Split 4/6kW

Ensuring a heat pump system has a suitable capacity for the building where it is installed is important for energy efficiency. The Therma V R32 Split 4/6kW models are 29% smaller in dimensions compared to existing models and provide smaller capacity solutions.³⁾ With the 4kW and 6kW models, the Therma V R32 Split can reduce overall energy consumption for smaller builds. An oversized heat pump may need to cycle on and off more frequently, which leads to higher energy consumption and poor efficiency.

3) Based on R32 Split 5/7/9kW (HU051MR U44, HU071MR U44, HU091MR U44)

While high-efficiency solutions are important, the demand for small-capacity solutions is also growing for other reasons. A smaller heat pump will also provide more consistent temperatures and more comfort for the occupants of a smaller space. These compact models are particularly ideal for new builds with limited space for installation, satisfying the demand in European markets.

R32 Monobloc S 9kW (3-Phase)

The new Therma V R32 Monobloc S 9kW makes it possible to connect to 3-phase power. As electricity-hungry systems, such as electric vehicle charging stations, are becoming more common, some European countries are regulating the maximum operating current of devices that use single-phase electricity. If the installation of a single-phase power system would exceed the allowed amount for a building, the power grid operator is able to deny the installation of that system. LG added the three-phase R32 Monobloc S 9kW to its lineup to address this issue and ensure lower energy consumption.

R32 Split 4/6kW

Performance is key to the effectiveness of a heat pump system. Even with a smaller capacity, the Therma V R32 Split 4/6kW models can simultaneously deliver efficient heating, cooling, and hot water supply. The advanced design of these models makes them comprehensive HVAC solutions that meet the diverse needs of users year-round. These compact solutions are ideal for new builds and they efficiently provide 100% heating capacity⁴⁾ at temperatures as low as -7°C,⁵⁾ ensuring reliable performance and comfort in various climates. In addition, a twin rotary compressor and BLDC motor-powered fan allow users to enjoy reduced operating costs and compliance with nZEB requirements.

4) The capability values indicated here are based on the performance table of the PDB (Product Data Book), and the values are simulation values and may differ from the actual values.
5) Normal: Outdoor air temperature 7℃ DB / 6℃ WB, Water outlet temperature 35℃, LWT: Leaving Water Temperature, OAT: Outdoor Ambient Temperature.

R32 Split 4/6kW

With peak performance from the Therma V R32 Split 4/6kW models, everyone from building owners and system designers to installers and end users reap the benefits. Smaller dimensions and higher efficiency allow building owners to market more living space and reduced heating and cooling costs. System designers can take advantage of nZEB regulation compliance and stable performance with no backup systems needed for more freedom in their designs. System installers benefit from easier installation and reduced maintenance and service. End users can reduce operating costs with a reliable system that provides efficiency and comfort in their homes. The Therma V R32 Split 4/6kW can also be combined with the Hydro Unit or Combi Unit to meet the diverse needs of consumers. Furthermore, the planet benefits from energy-efficient operation and reduced carbon emissions.

R32 Monobloc S 9kW (3-Phase)

Speaking of energy-efficient operation and lower carbon emissions, the Therma V R32 Monobloc S 9kW solution uses less refrigerant than competing products. Using less refrigerant reduces carbon emissions and reduces the overall environmental impact of the product. With certifications acquired or pending from organizations in Europe such as KEYMARK, EHPA, and Eurovent, users can rest assured that the Therma V R32 Monobloc S 9kW is an energy-efficient solution. Furthermore, the low electricity current used by the R32 Monobloc S 9kw alleviates concerns about power limitations related to the circuit breaker or thickness of the wiring.

In the past, heat pumps had a reputation for being noisy. That is not the case for Therma V heat pump solutions. The outdoor units of both the Therma V R32 Split 4kW and 6kW models have sound pressure levels of 35dB(A) and 36dB(A) respectively at a distance of 5m. The Therma V R32 Monobloc S 9kW (3-Phase) also has a sound pressure level of 35dB(A) at 5m. No matter the installation environment or conditions, noise emissions will not be a limiting factor when it comes to where the outdoor unit will be installed. These noise emissions parameters make it easy to comply with sound pressure threshold regulations in countries such as Germany, Austria, Switzerland, and the Netherlands.

As new regulations concerning environmental impact continue to be put in place and the market continues to rapidly change, the Therma V R32 Split 4/6kW and Therma V R32 Monobloc S 9kW heat pump solutions are reflecting the needs of consumers. Smaller capacity, better performance, eco-conscious operation, and lower noise emissions are providing consumers with what they need to stay compliant with local regulations and qualify for incentives from local governments. LG’s new Therma V solutions are becoming a must for developers, designers, installers, and homeowners.