Your front load washer will be with you for a while. Time will pass and you may need to rebalance the machine to prevent vibrations and keep it running smoothly and quietly. If you start to notice any abnormal vibration, there are a few things you can do.
- Check that the "packaging support" has been removed from the underside of your washer. It fits up into the machine and nestles against the bottom of the tub, and could go unnoticed. If it's not removed, your washer will vibrate more than needed.
- Check that all four shipping bolts have been removed. These bolts screw through the back of your washer and into the back of the outer tub. If they are not removed, your washer will vibrate and even "walk" around your laundry room.
- If vibration doesn't occur always, it could be that certain types of loads—and not the washer—are causing the vibration. That's perfectly normal.
- Check to see if the load is small or large, and if it consists of mixed fabric types or a large item. It could be that loads are not distributed evenly across the drum. If that's the case, pause the cycle and move the clothes around.
- Use a lower spin to minimize occasional vibration.
- Make sure the clearance requirements are being met.
If they're not, it could cause vibration.
- Sometimes it could be as simple as checking for foreign objects under the feet of the unit.
- And always make sure your washer is leveled. Even a quarter of a turn to the feet can make the difference between a quiet washer and a front load that is always vibrating.