LG How-to & Tips: Maintenance - Cleaning the Water Supply Hose Filter | LG New zealand
Skip to Contents
Close

How-to & Tips

Find help information for your LG product

Learn about product installation, maintenance, and troubleshooting using our search options.

Maintenance - Cleaning the Water Supply Hose Filter

  • How to Install and Operate
  • Maintenance
  • Operation
  • Dishwashers
  • Last Updated 16/05/2018

SUBJECT : Cleaning the Water Supply Hose Filter 

 

function Function

 ■ Proper cleaning of the Water Supply Hose Filter

 

 

check point Check point

 

■ A filter is fitted into the inlet of the water supply hose connection. 

■ Never over tighten the water supply valve or use mechanical devices to tighten. 

■ When reassembling the seal and the filter, ensure that they free from dirt or grit that may have come from the water supply.

 If insufficient water flows into the appliance, check that the filter is not blocked. 

■ If there is a leak, the water supply hose will need to be checked for proper connection. 


 

How to properly clean the Water Supply Hose Filter

 

1. Unplug the appliance. 

 

2. Turn off the water tap. 

 

3. Unscrew the water supply hose. 

 

4. Remove the seal and the plastic filter with a pair of small pliers or scissor grips.

 

5. Refit the filter and gasket and make sure that it is sitting correctly.

 

6. Refit and secure the water supply hose in reverse order. 

 

 

 

  Do not use any mechanical device to tighten the hose. A soft cloth can be used to assist hand tightening.

 

 

 


Article Feedback

1. Overall, how satisfied were you with the usefulness of this article?
1.1 Why did the article not resolve your issue?

Characters left : 500 / 500