Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help library

Find helpful information about your LG product

Regular Maintenance - Room Air Conditioner

  • Repair

Performing regular maintenance on your air conditioner can help to ensure that your unit continues to perform at its best! Select the type of air conditioner you have from the tabs below for maintenance information:

Warning: Before attempting any maintenance on your AC unit, power the unit off and unplug it from the electrical receptacle.

Check the air filter at least twice a month to see if cleaning is necessary. Trapped particles in the filter can build up and block the airflow that can reduce cooling capacity and cause an accumulation of frost on the evaporator.

    1. Pull the inlet grille forward.

    2. Remove the air filter from the front grille by pulling the air filter up slightly.

    remove air filter
    1. Wash the filter using lukewarm water below 104°F (40°C).

    2. Gently shake away excess water from the filter, allow it to air dry, and reinstall the filter.

    Clean Air Filter
  • To ensure continued peak efficiency the evaporator coils (inside behind front grille) and condenser coils (outside of the unit) should be checked periodically and cleaned if they've become dirty or clogged with soot.

    • Evaporator Coils: Remove the front grill, use a brush attachment with a vacuum cleaner to clean up any dust or debris that has made it past the air filter. If you are cleaning the coils after the air conditioner has already been running, put the unit in fan mode for about an hour in order to allow any condensed moisture on the evaporator coils to dry.

    • Condenser Coils: If possible, use a brush attachment with a vacuum cleaner to remove any dirt or debris that has build up from the outside. If using the vacuum isn't an option, you can also use a hose pipe to clean the condenser coils. Remove any garden sprayer attachments and allow the water to flow directly from the end of the hose down over the coils to wash away dirt and debris.

    Note: The fins are sharp so take care when cleaning them. Do NOT bend the fins. If this happens accidentally you can purchase a fin comb from a local hardware store. The fin comb can be used to straighten any bent fins.

    Clean Inlet Grille
  • When it comes to keeping the case of the AC looking new and clean, just follow these simply guidelines.

    • The front grille and inlet grille may be wiped with a cloth dampened in a mild detergent solution.

    • The cabinet may be washed with mild soap or detergent and lukewarm water.

    Clean Air Conditioner Case

Note: Before attempting any maintenance on your AC unit other than the "Auto Clean" mode, power the unit off and unplug it from the electrical receptacle.

The air filter should be cleaned every two weeks. Depending on indoor air quality, more frequent cleaning may be needed. A dirty air filter will decrease airflow and reduce efficiency.

    1. Grasp the grip at the top center of the filter and pull out the filter directly.

    2. Use a vacuum cleaner attachment to clean the filter. If the filter is heavily soiled, it can be washed in warm water using a mild detergent.

      Note: Do not use harsh cleaners or very hot water. Do not wash in a dishwasher.

    3. Allow the filter to dry completely before reinstalling.

    4. Reinsert the filter, making sure that the bottom of the filter is between the tabs and the coil guard. Reinstall the filter cover, making sure it clips into place.

    Clean Air Filter

    Note: Some portable units may use a slightly different cabinet design than what is show in the example to the left. Consult the operating instructions included with your unit if your model does not match the example.

  • Some models of LG portable air conditioners will have an auto clean function that is used to remove moisture from the heat exchange coils. This helps prevent the formation of mildew and odors.

    Note: Auto clean is Only located on the remote, in the case you have misplaced or have a non fuctional remote, a new one will be requered to run auto clean.

    1. With the air conditioner running in COOL, DRY, ENERGY SAVER, or HEAT mode, press the auto clean button (On the remote).

    2. Auto clean will be displayed in the LCD display.

    3. Press the POWER button to turn the air conditioner off. Auto clean will run the circulation and exhaust fans with the compressor off for a few minutes after the power is turned off.

    Auto Clean

    Note: To cancel or to stop an auto clean cycle in process, simply press the auto clean button again. The auto clean function will not operate if the air conditioner is already off.

  • Keeping your portable AC looking clean and new is easy, Wipe the case with a slightly damp cloth, then wipe it dry with a dry cloth or towel.

    1. To prevent damage to the finish, do not use gasoline, benzene, thinner, etc., or any abrasive cleansers to clean the air conditioner.

    2. Never pour water onto or into the unit; it could damage internal components and create a shock and fire hazard.

    Clean Air Conditioner Case

Maintenance information about split unit or duct free air conditioner, and will not be covered in this article as they are considered buisness units which requires technical maintenance routines, please visit for more information.

Author - Sanmi Ajanaku

Sanmi is a Home Appliance expert and author of this help library article. Please leave him feedback below about the page.

*Required question

Related Help Library

See more