LG Dryer - Reversing the Door[Narrator]
LG makes it easy to properly install and setup your new LG dryer.
This video will take you through the step-by-step process to properly reverse your dryer door.
Please note that the dryer door is large and heavy.
For proper safe installation, make sure that you or an assistant are able to support the door to prevent any damage.
You will need a driver or an impact driver for this installation.
Start by opening the dryer door, make note of the different screws located on each side.
Depending on your dryer model insulation and parts may vary.
First, remove the 4 dummy screws using a driver.
An impact driver may be necessary, if the screws are in too tightly.
Next, remove the 2 screws on the latch and disassemble the latch from the unit.
On the right side where your door is connected have someone support the door and remove the 4 screws located on the hinges.
You will now be able to remove the door from the cabinet.
Move the door to the left side and insert the hinge into the hinge hole.
Pulled in place and screw the 4 hinge screws into place.
On the right side of the unit, screw the 4 dummy screws into place.
Insert the latch and install the relevant screws.
Check that the door closes and latches properly.