To properly experience our website, you will need to use an alternate browser or upgrade to a newer version of internet Explorer (IE9 or greater).

The website utilizes responsive design to provide convenient experience that conforms to your devices screen size. In order to get the best possible experience our LG.COM website please follow below instructions.

If you’re using Internet Explorer 8 or earlier, you will need to use an alternate browser such as Firefox or Chrome or upgrade to a newer version of internet Explorer (IE9 or greater).

If you’re using Internet Explorer 9 and higher, turn off your Internet Explorer browser’s “Compatibility View settings” by following steps below:

  • Right click at the top of your browser and make sure the “Menu Bar” option is selected
  • Select “Tools” from the menu bar and then select “Compatibility View settings”
  • In the pop-up menu uncheck all three boxes and click “Close”
  • Your browser window will automatically refresh and you’ll be ready to go
Skip to Contents Skip to Accessibility Help


Key Features

  • Access Data or Stream Media via the Internet
  • 2 Terabytes of Storage
  • Gigabit Ethernet Support (10/100/1000)
  • Remote Access/Multiple User Access

What People Are Saying

Rated 4 out of 5 by from Work Horse--but don't update firmware Have had two of these units in constant use for 3+ years. Speed was good. Options for additional interfaces good--mem cards, USB back up, USB print server, and optical drive are all handy. manual as good as can be expected, but. . . I would agree with previous review that upgrading the firmware is a BAD IDEA unless you really read through the notes and want to sacrifice ALL the RAID options. Further, the newest interface is a bit finicky and drops in-and-out of visibility for my media devices, but dependable for computers. Inability to exceed the 2TB is annoying, but well documented before I purchased. Latest firmware recognizes both 2TB HDDS but will not build a RAID and will not allow access to Drive 2. In effect I lost redundancy and gained no storage. NOTEs say you cannot "undo" firmware and have not tried, but wish I could. Product solid, updates suck. Did like the "home monitoring" option which gives web access to an attached USB camera--but only one.
Date published: 2014-09-17
Rated 1 out of 5 by from AVOID! This device was, when purchased, as servicable NAS. After the latest update, however, it is UNUSABLE as a full featured network storage device. There is no support for basic features like RAID1 or JBOD. From what I can see, there is no way to map two drives at the same time. As a result, only one of my 3TB drives are being used. AVOID AT ALL COSTS! IF YOU HAVE AN OLDER VERSION OF THE FIRMWARE (2660 or prior) DO NOT UPDATE TO THE NEW FIRMWARE!
Date published: 2014-01-05
Rated 5 out of 5 by from Very Satisfied Was looking for an NAS for my movie collection. This one does the trick with no troubles at all. Its also nice to have a network printer.
Date published: 2012-12-10
  • y_2019, m_6, d_17, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_18
  • loc_en_US, sid_MD00001262, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_lg
  • bvseo_sdk, java_sdk, bvseo-
  • CLOUD, getReviews, 184ms


Ask your questions. Share your answers.
Please first review the detailed product information and help guides in the Product Support section for this product prior to posting a question.

Is the esata port on the back of the n2b1 bidirectional. Meaning could i plug a seperate non network atacted harddrive enclosure into the n2b1 and have it be accesable?

Asked by: Adam1schuler
The e-SATA port in the back of the ENERGY STAR® 5.0 Compliant LG 2TB Super Multi NAS with Blu-ray™ Re-Writer, Model # N2B1DD2 a signal (but not power) for external storage devices..^IFV
Answered by: LGJoel
Date published: 2017-11-17

Hey. My LG-NAS model N2B1DD2 says " NAS is Booting " but never starts. Anyone to help? I've tried to pull out the hard drives, but still the same result.

Asked by: JensG
Our offices, in the United States, do not have product information for Denmark. In order to obtain such information, it is recommended to check our subsidiary’s website, at
Answered by: NeilE
Date published: 2017-07-18

how do i reset the nas to factory default

i am unable to access the device? does anyone know the default IP or how to factory reset the device?
Asked by: gerardobrien
You can't. See my review at LG. Engineer Colt's Neck
Answered by: 1357924680
Date published: 2013-10-22

Can any of these storage products be used with a Mac?

I am looking for a something to back up my Mac Book. I am not sure if any or which accessories offered will allow me to do this or if I need several items?
Asked by: P1984
It can very easily. I use it with a mac on a daily basis. Attach the NAS to your router install software on mac. your done.
Answered by: Tomcody42
Date published: 2013-10-22

Latest firmware for 2T Nas-Server

Latest firmware I have is 6674. Device says there is a latest firmware but file is corrupt. Whaere can I get the latest firmware?
Asked by: JustMe
We regret the inconvenience you have experienced with this NAS device. According to our website, there does not appear to be any updates available for this unit. If you have additional questions about this device, please contact our Customer Interactive Center at 800-243-0000.
Answered by: NeilE
Date published: 2013-10-22

We have an N2A2DD2 NAS drive and are moving offices and getting a new static IP address. How is the best way to change the IP address on the drive?

Asked by: jayr
We appreciate your interest in this network device. It is suggested to change the settings on the system to DHCP before it is moved from one location to the next. After the move, run the NAS Detector feature to ‘find’ the device. Once it has been located on the network, it can be re-configured to a Static IP address once more.
Answered by: NeilE
Date published: 2013-10-22

Are there any advanced DLNA diagnostics?

1) I cannot find any DLNA related logs in the Reports>Log section. Is there any way to see what clients are currently connected via DLNA? 2) Updating the DLNA library does not give any feedback on it's progress. Is there any way to know when the updating process is complete? Currently I am just watching the Reports>System Resources section to see if it is still active. 3) Is the DLNA updating of the library scheduled internally on any sort of interval and if so, what is it. If not, does this mean that I will have to manually update the library everytime I add a new file?
Asked by: Kaibutsu
I apologize, but no; there are no advanced diagnostics for DLNA file sharing. The only options available from the User Interface are to either enable or disable the DLNA service, to add a path to be shared DLNA folder, or to update the DLNA library. Regrettably, it will not be possible to determine what clients are connected to the system via DLNA. No progress bars will be shown, but once the job is completed, a pop-up message will state when it is COMPLETED. This will not, however, be noted in the log. New files added to the shared DLNA folder should automatically appear. If it does not, then you may try to disable the service, and then re-enable it. This should also update the library data. If you have additional questions, please contact our Customer Interactive Center at 800-243-0000.
Answered by: NeilE
Date published: 2013-10-22

What is the network speed for the N2A2 NAS?

I am writing a paper on NAS devices and need to know the network speed.
Asked by: mltriviski
The N2A2DD2 NAS device has support for gigabit Ethernet (10/100/1000).
Answered by: LGJoel
Date published: 2013-10-22
  • y_2019, m_6, d_17, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_145
  • loc_en_US, sid_MD00001262, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_lg
  • bvseo_sdk, java_sdk, bvseo-
  • CLOUD, getContent, 231ms
Go to Top