LG Dryer - Changing The Drum Light

• To verify that the drum light is burned out, open the door and press the power button.

• If the light comes on, the bulb is not burned out and you should refer to the activating the drum light video.

• Unplug the dryer or disconnect the power.

• The drum light is located at the upper left of the door opening.

• Using a Philips screwdriver, remove the screw holding the light lens in place.

• Slide the lens up about a quarter of an inch to release it and then lift it out.

• Unscrew the light bulb.

• If the old bulb has a rubber gasket on it, remove the basket and replace it on the new bulb.Install the new 15 watt 120 volt bulb.

• Remount the lens and slide it down to lock it in place.

• Install the screw in the lens.

• Reconnect the power cord.