We appreciate your interest in this television. According to the installation instructions for this TV, the base is held in place by installing 8 screws in the bottom of the stand. These must be removed. Once removed, the next step would be to remove the cosmetic panel which covers 2 securing posts. There are 4 screws on each side of these switch posts. Remove these screws before sliding these posts to the WALL TYPE position. Once this is done, the base should fold flush with the back of the TV. Note that, according to page 9 of the owner’s manual, there are 2 AV Box Fixing Supports provided to hold the base in place. Each of these Supporters has a long screw and a short screw. The longer screw would install through the Supporter into the TV, while the shorter screw will pass through the Supporter into the base stand.
Date published: 2016-08-19