Skip to Contents Skip to Accessibility Help

GH20LS10 Support

Receive help on your LG product

Check out the latest information related to this product.

  • Computers
  • Burners & Drives
  • GH20LS10


Warranty Information Labor 1 Year / Parts 1 Year Details
If you need Repair Service, submit an online service request. Request a Repair

Manuals & Documents

For the most accurate technical information regarding features, specifications, installation and operation of your LG product, please refer to the Owner's Manual and other documents available for this product.

  • Owner’s Manual
    Most comprehensive document of product setup and usage.
  • Specification
    Summary of product features, dimensions, and components.

Software, Firmware, & Drivers

  • Software Update

    Software upgrades include device drivers and firmware updates only for specific models. Check your owner's manual to determine if your product supports software upgrades.

    Please check the Model List in the Reference section, paying special attention to the end (i.e. xxx-UA)

    ※ New firmware (ver. FL01) for only GH20LS10(Internal Super multi DVD Writer) Reference


    ◆ Model:GH20LS10 ◆ Ver:FL01 ◆ Improvement Point   -. Improve Writing Strategy for new 20X media Refer to the attached file


    GH20LS10 Version FL01 Firmware Update To update the firmware of the GH20LS10 please refer to the following instructions: Note: Not following the subsequent update instructions explicitly will result in  permanent damage to your drive, for which LG will not be responsible. This firmware update is for drives with original firmware versions below FL00. The drives must be original LG branded drives with the DVD Writer  model number GH20LS10(no OEM units).  If you have an OEM unit, branded with another manufacturers name,  please contact that manufacturer for support and firmware updates. This firmware update is for use only on PC's with Windows Vista, Windows XP  and Windows 2000.

    [Critical Instructions: (to be followed carefully)]

    1. Connect the drive as "master" by it self, on the secondary IDE controller     with no other device on the same IDE cable, making note to set the jumper     on the back of the drive to the "master" position. 2. Download the file GH20LS10_FL01(EW).ZIP to a folder of your choice.     This download includes this "Read me(ew)" text file, as well as the GH20LS10_FL01.EXE    program, which will auto-update your drive's firmware. 3. Close all other programs including: screen saver, antivirus and/or power-down programs.     (If these programs are not closed, they will try to engage the PC, during the update process,    thus interrupting the update and damaging the drive). 4. Check the drive to ensure that there is no disk in the tray     before you start the update procedure. 5. Go into the folder with the update file and double click the GH20LS10_FL01.EXE program     and Firmware upgrade will be started.    When the UPGRADE is complete the screen should indicate "Re Boot" message    and advise you to reboot the system. You will need to reboot your PC   The update will be complete, after you reboot your system.


    Do not open any programs or start any system functions during the update,     as they will interfere with data transfer and damage the drive.     Do not cancel the operation once it has been started or the drive will     become permanently damaged, as a result.


You’ve come to the right place. Find the right accessories and parts for your LG products. Enjoy the reassurance of LG quality and buying directly from