Find helpful videos about your LG product Find helpful videos about your LG product
Video Tutorials

Find helpful videos about your LG product

LG Washer - Dispenser Maintenance

Operation

At a Glance

To ensure proper dispensing and to minimize problems with your LG washing machine detergent dispenser, it is recommended that you clean the dispenser once a month.

Try This

  1. Select Your Washer Model:

    Front load washer decision tree button
    Front Load Washer
    top load washer decision tree button
    Top Load Washer
  2. Select Your Dispenser Type:

    Dispenser Drawer decision tree button
    Dispenser Drawer
    Dispenser Compartment decision tree button
    Dispenser Compartment
    1. Remove the dispenser drawer and clean the area

      1 Pull out the detergent dispenser fully, push it upward, and then firmly pull it out.

      2 Use a small brush to clean any residue from the upper and lower parts of the recess.

      image of the dispensor drawer highlighting its location
    2. Clean the inserts and drawer with warm water

      1 Use a soft cloth or brush to clean and remove any residue

      Note

      DO NOT use soap when cleaning the drawer and inserts.

      2 Wipe off any moisture with a dry towel or cloth after cleaning.

      3 Return the inserts to the proper compartments

      image of the dispensor drawer highlighting its location
    3. Reinstall the dispenser drawer

      1 Tilt the detergent dispenser upward. (at least 45 degrees).

      2 Gently push up the box and slide it into the position so that both sides of the white parts are inserted into the groove in the back of the detergent dispenser.

      image of the dispensor drawer highlighting its location
  3. Cleaning a dispenser drawer

    1 Open the dispenser drawer, then pull it out while pressing the [PUSH] button.

    2 Clean it with a toothbrush using lukewarm water.

    3 Reassemble and reinsert the dispenser drawer.

    image of the dispensor compartment highlighting the edges
  4. Cleaning a dispenser compartment

    1 Open the dispenser compartment and pull the edges up to pull it out as shown.

    2 Pull out the fabric softener dispenser, and lift the cover and clean it with a toothbrush using lukewarm water.

    3 Put the lid back on tightly and reinstall the dispenser inserts into the proper areas.

    image of the dispensor drawer highlighting the push button
*Required question