Skip to Contents

How-to & Tips

Find help information for your LG product

Learn about product installation, maintenance, and troubleshooting using our search options.

Method to set DPM value (if display is going to Standby mode after disconnecting the input source)

  • Others
  • Others
  • Installation
  • Commercial TV, Digital Signage
  • Last Updated 03/28/2017

SUBJECT : Method to set DPM value (if display is going to Standby mode after disconnecting the input source)

function Function

DPM is Display Power Management. If this function is enable then set will go to standby mode after the defined time (which is set in menu)

To enable or disable this function you need to enter into Installation Menu

check point Check point

Please check Power and IR Sensor cable thoroughly

how to setup How to Setup

Press and hold the setting button for 5 seconds

When Input ID bar displayed (on the top right corner) then enter password (Default password is 0000) and press Ok.

When Installation Menu display the select Signage Setup option

Go to DPM option and set value to OFF or desired timing (5sec/10sec/15sec/1min/3min/5min/10min)

If you have selected OFF then display will never go to Standby mode but if you selected the time then display will go to

standby mode after the selected time period when you have disconnected the input source.

If the problem is not resolved, please call  LG Support representative on 1800-180 -9898 (Toll Free)


Not all features are available in one product
Not all products are available in the global market
The information is for general information purposes only and created for consumer awareness
Any reliance on information is strictly at its own risk
In no event LGEIL will be liable for any loss or damage including without limitation, indirect or consequential loss or damage,

     or any loss or damage whatsoever arising from loss of data or profits arising out of or in connection with the use of this informational video.

The solutions provided herein  might vary based on the models, please verify before implementing.

No part of this text or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.

The information is provided free of costs and to serve end users.
The information is not meant for any claims or comparison with competition, but to facilitate the customer to understand  product features.

Article Feedback

Q1. Overall, how satisfied were you with the usefulness of this information?
Q1-1. Why were you dissatisfied withthe usefulness of this information?

Characters left : 500 / 500