PuriCare™ AeroCat Tower Air Purifier

The term 'UVnano' has been coined by compounding the words 'UV-C (ultraviolet)' and 'nanometer' (unit of length). UVnano light kills over 99.998% of harmful bacteria on the surface of the fan blades, helping keep even hard-to-reach areas more hygienic.

*UVnano

 -Test application number: TBK-2024-009193

 -Test date: '24.09.04~24.09.07

 -Target model: AS55*G***

 -Test agency: KOTITI

 -Test conditions: Temperature 20±5℃, humidity 50±10%, fan with low wind, UVC LED (6 hours On/ 1 hours Off)

 -Test method: Confirmation of sterilization performance for three bacteria using UV LED (low wind, 1 hour) on the upper and lower fans

 -Test strains:

  Staphylococcus aureus ATCC 6538p

  Klebsiella pneumoniae ATCC 4352

  Staphylococcus epidermidis ATCC 12228 

 -Test Results:

  Staphylococcus aureus: Top 99.999%, Bottom 99.999%

  Klebsiella pneumoniae: Top 99.999%, Bottom 99.999%

  Staphylococcus epidermidis: Top 99.999%, Bottom 99.998%

 -The test result is based on a lab environment, and can vary if conditions change.

The filter replacement cycle is one year. When it is time to replace the filter, a notification is generated automatically. This can also be checked on the product, and via the LG ThinQ app.

*The filter replacement cycle is based on 10 hours of use per day. It may differ depending on the actual usage hours and the environment.

First, separate the cover from the product. Then, remove dust from the Pre-filter using a vacuum cleaner that has a crevice tool or soft brush attachment.

Take care when using vacuum tools to avoid damaging the product or the filter.

For the Aero Series V Pet Filter, light can regenerate the performance of the photocatalytic deodorizing filter.

Regenerate the filter by exposing it to sunlight in an open area. At night, regenerate the filter by exposing it to a light for about 3 hours.

We recommend a regeneration cycle of once every 2 months for about 3 hours.

*Caution: Do not wash the filter with water. Doing so may reduce its lifespan.

*The regeneration performance of the deodorizing filter was tested under standard test conditions for household odors (ammonia, acetic acid, acetaldehyde) commonly encountered in homes with pets.

*Standard test conditions: Evaluated according to the Korea Air Cleaning Association's test method for removing harmful gases (deodorization).

A HEPA filter, which stands for High-Efficiency Particulate Air filter, is designed to capture very fine particles with high efficiency. The HEPA filter in the LG air purifier traps particles as small as 0.01µm.

*Traps 99.999% of particles as small as 0.01µm

*Test application number: CT24-078042E_M1

*Test date: '24. 9.3~ '24. 9.9

*Test Agency: Korea Conformity Laboratiories (KCL)

*Test product: AS55*G***

*Test conditions: Purification chamber size: 30.0㎥, Temperature: 23.0±3.0℃, Humidity: 50.0±10.0 %R.H.,

*Operating conditions: Turbo

*Test method: After stabilizing the generation of 0.01µm diameter KCl (potassium chloride) particles, operate the air purifier for 4 hours until the dust removal rate drops to 99.999 more %, and measure the reduction in operation. (Reference standard: SPS-KACA 002-0132:2022, Indoor Air Purifier Appendix A)

*Test result: 99.999% removal when operating for 28 minutes and 10 seconds or more)

*The test result is based on a lab environment, and can vary if conditions change.

Install this product at least 1 meter from the wall. If there is not enough space for air intake, air purifying functions may be affected.

The performance of this product may vary depending on the environment (temperature, humidity, etc.). This product can perform effectively in an environment with 40% to 70% humidity. Do not install it in an area exposed to direct sunlight or near strongly bright lights.