Adjusting the Focus of the Projection Screen
When an image appears on the screen, check if it is in focus and fits the screen properly.
To adjust the focus of the image, slowly adjust the focus knob to the left or right while looking at the top center of the screen. You can adjust the focus most effectively when the left and right screen are balanced. When adjusting the focus on the screen, do not let the product shake.
Adjusting the Focus of the Projection Screen
You can use the Projection Screen Position (Lens Shift) Adjustment Dial to adjust the position of the projection screen without moving the projector up, down, left or right. If the projection screen does not align properly on the screen even after adjusting the position of the projection screen using the Projection Screen Position (Lens Shift) Adjustment Dial, use the [Keystone] function.
How to Use the Projection Screen Position (Lens Shift) Adjustment Dial
You can use the dial to move the position of the projection screen (lens) without moving the projector.
| Up/Down Adjustment Dial | Left/Right Adjustment Dial |
|---|---|
|
|
|
|
|
|
Caution :
Clicking sounds while rotating the dial indicates that no further adjustment can be made. Continuing to rotate the dial after reaching the maximum position may cause damage to the dial.
Adjustment Range of the Position of the Projection Screen
The range for moving the position of the projection screen using the Projection Screen Position (Lens Shift) Adjustment Dial is shown below
-
When the lens position is at its vertical limit (up/down), you cannot move the lens horizontally (left/right).
-
When the lens position is at its horizontal limit (left/right), you cannot move the lens vertically (up/down).
