Select models of the Pedestal Washer can have warm water connection.
Warm water is supplied based on the chosen cycle and settings.
Try this.
The Pedestal Washer now includes temperature selection in certain models.
Temperature selection is available for each cycle.
If no temperature selection is made, only cold water is supplied.
When a temperature above 30°C/86°F is selected, warm water is supplied.
First, cold water is supplied for 30 seconds followed by warm water supply.
During the rinse phase, only cold water is supplied.
Cold and warm water supply alternate during use, in order to maintain the selected temperature.
Cold and warm water cannot be supplied at the same time.
After water supply is completed, the water temperature is maintained by the heater.
Cycles that allow for warm water selection
After cycle selection, press the Warm Water button for warm water supply.
The button will light up when selected.
- Normal : Use this cycle to wash lightly soiled normal items, except delicate fabrics such as wool or silk.
- Intimates : Use this cycle to wash delicate items such as lingerie or sheer and lacy clothes which could easily be damaged in a normal cycle.
This cycle is not for silk items. - Hand Wash : This cycle is for washing shrinkable woolen or handwashable items requiring delicate care.
Only wash woolen items that are labeled machine-washable or hand-washable. - Active Wear : Use this cycle to wash performance garments that are specially designed and treated for sports.
- Tub Clean : This is a special cycle designed to clean the inside of the washer.
- In situations where operation is incomplete, such as when the washer is paused, residual heat may remain in the washer tub.
- For user safety, the washer does not open if 40℃/104°F or higher is detected.
- The washer can be opened by cooling it down with cold water.
Select ‘Rinse+Spin’ to cool down and unlock the washer.
This guide was created for all models, so the images or content may be different from your product.
