The Channel menu option allows the TV tuners to tune to available Over The Air or Basic Cable Stations and store the results in 4 distinct groups; DTV, TV, Cable DTV, and Cable TV.

Channels are not registered properly unless the antenna/cable is connected correctly. If you move the outdoor or indoor antenna, you will need to run the Auto Tuning facility again, as Auto Tuning only sets channels that are currently broadcasting. If Lock System is turned on, a pop-up window will appear asking for your password.

Automatically tunes the channels.

1.

Press the SMART button on the remote control and select Settings > CHANNEL,on the TV menu.

2.

Select Auto Tuning on the TV menu.

3.

Select Start to proceed with Auto Tuning.

4.

The TV screen will cycle through the following screens automatically.

5.

Select Done when finished, to return to menu.

Note:

The following restrictions apply.

• Channels are not registered properly unless the antenna/cable is connected correctly.
• Auto Tuning only sets channels that are currently broadcasting.
• If Lock System is turned on, a pop-up window will appear asking for password.

Adjusts channels manually and saves the results.

1.

Press the SMART button on the remote control and select Settings > CHANNEL,on the TV menu.

2.

Select Manual Tuning on the TV menu.

3.

Channels are shown separately for each tuner: DTV, TV, Cable DTV, or Cable TV. First select the tuner, and then the channel lineup for that tuner is shown. Scroll through the channels using the left (decrease the channel number) and right (increase the channel number) arrows. The channel signal strength and signal quality are shown in the indicators on the menu. A channel can be deleted from the list by selecting Delete.

4.

As channels are selected with the scrollbar arrows, the Add option will appear on the Manual Tuning menu for channels not currently in the lineup. The keypad can be used to enter additional channels not shown in the lineup. The number entered on the keypad will appear in the channel lineup, then select Add to save.

5.

Select Close to exit the menu.

Note:

For digital broadcasting only, signal strength and signal quality will be displayed in the Manual Tuning window.

Channel Edit enables you to set a channel as a favorite, block/unblock and Add/Delete etc. the selected channel.

1.

Press the SMART button on the remote control and select Settings > CHANNEL,on the TV menu.

2.

Select Channel Edit on the TV menu.

3.

Select which channel you want to edit.

4.

Use one of the colored function buttons to edit that channel.

The available functions are listed below.

• Add/Delete - Marks Channel for Manual Tuning - Delete Function. (After selecting Channel(s), use the Manual Tuning Option.)
• Block/Unblock - Requires the Lock Function to be set - Channel Lock. Allows the blocking and unblocking of specific channels.
• Set as Favorite - Adds to Favorite list - 1 of 4 Groups (A,B,C,D). Choose which channels to add to a group list.