[LG Air Conditioner Remote] How can I individually control ceiling-mounted air conditioners using the remote when they turn on simultaneously?

When multiple LG ceiling-mounted air conditioners are turned on simultaneously, the individual control function allows each indoor unit to operate independently.
To do this, you need products that support individual control and a remote control that supports this feature. By setting the indoor unit number on the remote control, you can operate only the desired indoor unit.

What is the individual control operation feature of LG air conditioners?

• This feature allows multiple indoor units in the same space to be assigned numbers, enabling independent operation for each unit.
• When using a shared remote control, nearby air conditioners may turn on simultaneously, so individual control settings are required.

Products with individual control and remote control

Product

• 1Way Ceiling-Mounted: Products manufactured after November 2017
• Multi V Ceiling-Mounted (Single-Pipe) Product
• 1-Way/2-Way/4-Way Ceiling Mount: Products manufactured after July 2017

How to Set Individual Control for LG Air Conditioners

Type A/Type B Remote Control

1. 1. Press and hold the [Internal Unit Selection] button while pressing the RESET button to enter the address setting mode.
   ※ Some remote controls can enter address setting mode by pressing the indoor unit selection button for 3 seconds.
2. 2. Press the [In-Car Selection] button to select all. → 1 → 2 → 3 → Select the number in order.
3. 3. Transmit the selected number to the air conditioner using the drive/stop button from a distance of 10cm.
4. 4. Press the RESET button to exit the settings.

Type C Remote Control

1. 1. Settings button → Use the left and right buttons to select "Additional Features" → Select "Individual Registration for Actual Shipment"
2. 2. Select the indoor unit number (1–4), then transmit from a distance of 10cm using the Run/Stop button.
3. 3. Press the Settings button to exit.

How to select an indoor unit when using individual control

• A/B Type: Select all using the [In-Car Selection] button → 1 → 2 → 3 → 4 cycle
• Type C: Press and hold the Settings/OK button for 3 seconds. → Use the left and right buttons to select all or 1 to 4

Precautions

• Caution: When transmitting individual control numbers, ensure transmission occurs within 10cm. Transmitting from a distance may cause other indoor units to recognize the same number.
• If you have not set an individual control address, use 'All' mode.
• The indoor unit selection function does not operate in reservation mode.

※ Depending on the product's features, some products may not function.

This guide was created for all models, so the images or content may be different from your product.