To improve the suction power and enable more hygienic use, clean the nozzle at least once a week.
If you use it without cleaning the nozzle, then the cleaning performance may degrade or it can even smell.
If it is hard to separate it, then visit the service center or request a door-to-door service.
Note that if you exert excessive force to turn it, then the part can get damaged.
Try this
How to clean the Wide LED nozzle
1. Separate the nozzle from the length extension pipe.
2. Turn the rotating brush counterclockwise with the PUSH button pressed with a left hand, and pull it in the direction of the arrow.
3. Attach the gap nozzle to the main body and remove any contaminants from the separated rotating brush.
4. Hold both sides of the revolving brush and pull them in opposite direction to separate the parts.
After separating it, remove any contaminants using your hand.
5. If there is a foreign object on the rotating brush, then use wet tissue or toilet paper to remove it.
6. Remove it from the bottom of the nozzle in the same way.
7. Never rinse the revolving brush or the nozzle body with water.
The use of water may lead to fire or electric shock, or may damage the vacuum cleaner.
8. After cleaning, reassemble the separated revolving brush by pushing until you hear the clicking sound.
9. Insert the rotating brush in the direction of the arrow and close it by rotating it clockwise until you hear the clicking sound.
10. If contaminants are caught in the roller at the bottom of the nozzle, use a pair of tweezers to remove them.
11. If there is a foreign object in the small roller on the nozzle, the insert a flat headed screw driver into the groove and separate the fixing parts and disassemble the roller.
Make sure to avoid injury to your fingers when using a screw driver.
12. After removing contaminants, insert the roller and fix the part by pressing it.
13. Check that the roller is fixed on both sides.
This guide was created for all models, so the images or content may be different from your product.
