Try this
How to use the mop pad nozzle
1. Press the [PUSH] button to separate the water bucket from the mop nozzle.
2. Open the water injection hole cover and fill up with water until it reaches MAX.
Now, you can conveniently use the water injection cup contained in the vacuum cleaner package provided when you purchased it.
Do not inject hot water into it.
3. After closing the water injection hole cap, reassemble the water bucket with the mop pad nozzle.
Correctly insert the outer hook below the water bucket into the water bucket fixing groove and press the water bucket fixing unit until you hear the clicking sound.
4. Soak the mop in water and then wring excess water out of the mop sufficiently.
Align the center of the mop with the center of the mop attachment plate and attach it with the striped side of the mop facing up.
When you do cleaning works, use the general cleaning mop pad and if you want to clean more thoroughly then use the old stain cleaning mop pad.
5. After inserting the mop pad nozzle into the pipe, turn on the power for use. Now, do not place the nozzle near the location with liquid.
If liquid is sucked in, it can damage the vacuum cleaner.
6. Turn on the water spray quantity control button.
By pressing the water spray quantity button to the left(level 1), you can reduce the amount of water spraying to clean the floor sensitive to moisture.
By pressing it to the right(level 2), you can increase the amount of water spraying to clean the location with old stains or lots of dusts.
Water is not dispensed.
Or, when you move, in order to prevent leakages of water, water will be supplied only when the nozzle touches the ground.
How to store the mop pad nozzle in the charging station
How to clean the mop pad nozzle
This guide was created for all models, so the images or content may be different from your product.
