Applicable models : Steam Dryers
Causes and Symptoms
- I would like to know how the steam function works, its temperature and how it is applied to each cycle.
How does the steam function work?
➔ The steam generator heats clean water to 100℃/212°F, producing small water molecules that permeate through the fabric, effectively removing creases and odors while also sanitizing the laundry.
Jet steam temperature
➔ When steam is generated, the temperature inside the drum may reach up to 75℃/167°F to 80℃/176°F, and the temperature of the steam 100℃/212°F.
The duration of steam injection is different for each steam cycle/option.
- Normal / Towels + Steam (Load detection time + 30mins)
Default drying (Warm air) → Steam 7mins (Jet of hot steam) → Warm air drying 25mins → Cool air drying 3mins - Perm Press. + Steam (110mins)
Warm air drying → Steam 3mins (Jet of hot steam) → Warm air drying 15mins → Cool air drying 3mins - Steam Fresh (32mins)
Dust removal 4mins → Steam 6mins (Jet of hot steam) → Warm air drying 19mins → Cool air drying 3mins - Steam Sanitary (150mins)
Dust removal 4mins Steam → 7mins (Jet of hot steam) → Warm air drying → Steam 7mins (Jet of hot steam) → Warm air drying → Cool air drying 20mins - Down Jacket Refresh (47mins)
Dust removal 4mins → Steam 6mins (Jet of hot steam) → Warm air drying 34mins → Cool air drying 3mins - Blanket Refresh (50mins)
Dust removal 4mins → Steam 7mins (Jet of hot steam) → Warm air drying 29mins → Cool air drying 10mins
Jet steam amount
- Normal, Towel + Steam option: 200cc / 7oz
- Perm. Press + Steam option: 90cc / 3oz
- Steam Fresh: 170cc / 6oz
- Steam Sanitary: 200cc / 7oz * twice
- Down Jacket Refresh: 170cc / 6oz
- Blanket Refresh + Steam option: 200cc / 7oz
- Condenser Care: 170cc / 6oz
- Drum Care: 60cc / 2oz
Steam is injected downwards at a 45° angle from the back of the drum.
Note
During a steam cycle, the drum spins to remove large dust particles from the laundry before steam is injected.
This process lasts for 4 minutes and may be accompanied by warm air drying.
Following this, a warm air/cool air drying phase occurs, which removes any remaining dust from the laundry.
To maintain optimal performance, regularly clean the filter to prevent it from becoming clogged with dust,
which can cause dust to stick to the door and gasket. After each use, clean the filter and wipe dust off the door and gasket.
For best results, fill the drum only up to half its capacity to ensure proper airflow.
Overfilling the drum can result in some dust sticking to the door and gasket.
This process lasts for 4 minutes and may be accompanied by warm air drying.
Following this, a warm air/cool air drying phase occurs, which removes any remaining dust from the laundry.
To maintain optimal performance, regularly clean the filter to prevent it from becoming clogged with dust,
which can cause dust to stick to the door and gasket. After each use, clean the filter and wipe dust off the door and gasket.
For best results, fill the drum only up to half its capacity to ensure proper airflow.
Overfilling the drum can result in some dust sticking to the door and gasket.
Should you need assistance, please reach out to our 24/7 Chat Support.
This guide was created for all models, so the images or content may be different from your product.
