Causes and Symptoms
- Nozzle selection lever is set to floor mode.
- Floormat is not firmly attached to the floor.
Depending on the floor environment, it is possible to change the nozzle.
By pressing the suction switching lever forward/backward, you can adjust the level of attachment to the floor.
Try this
Is the nozzle selection lever set to floor mode?
➔ If the model has a carpet/floormat selection lever, then switch to carpet mode.
You can adjust the level of attachment to the floor.
Isn’t the floormat firmly attached to the floor?
➔ Check how firmly the floor and the floormat are attached to each other.
If there is a gap between them due to incomplete attachment, then when the vacuum cleaner operates, due to the suction power, the floormat might get attached to it.
This guide was created for all models, so the images or content may be different from your product.
