Shelves assembly [styler]

Shelves assembly [styler]

Instructions for assembling shelves inside the styler.

Try this

Styler shelf assembly order

Assemble the styler shelf by sliding the shelf part to the styler cabinet. For more details see below items:

1. Open the Styler door.
2. Check the Styler shelf. (Styler shelves have different groove structures on the left and right sides.)
   
3. If you hold the silver decoration facing yourself, the groove on the left is closed at the bottom and top, and the groove on the right is open at the bottom.
4. After inserting the left groove that is closed at the top and bottom into the shelf hanger inside the product, hang the other end over the right shelf hanger.
   

   Note :

   The shelf cannot be assembled by sliding it into the cabinet. It will fall if not assembled properly.

5. To disassemble, lift the right side of the shelf up, then pull out the left side of the shelf from the shelf support.
6. Be careful not to place heavy objects on the shelf or allow children to climb onto it. Failure to comply may result in product failure and injury.

This guide was created for all styler models. Images or content presented herein may differ from your product.