Washer in let Hose (1.25m, Cold Water) - 5214FA1609X

Washer Inlet Hose (1.25m, Cold Water)

5214FA1609X

Key Features

LG Washing machines Genuine Hose & Hose Connector

Mounting Location

The actual installation location of this item may vary depending on product model.

For more detailed information, please refer to the product manual for your model.

It is mounted on the upper part of the back

How to Replace

The replacement instruction for this item may differ slightly from the information below.

For more detailed information, please refer to the product manual for your model.

STEP 1

Unscrew the adapter ring plate and loose the 4 fixing screws.

STEP 2

Push the adapter onto the end of the tap so that the rubber seal is connected to be watertight.

Tighten the 4 fixing screws and the adapter ring plate.

Diagram showing how to use a screwdriver to adjust a valve on a water tap, with red arrows indicating direction.

STEP 3

Pull the connector latch plate down, push the inlet hose onto the adapter, and release the

connector latch plate. Make sure the adapter locks into place.

Diagram showing hands connecting a hose to a faucet with red arrows indicating the connection direction.

STEP 4

Screw the water inlet hose to the water inlet valve on the back of the appliance.

-On models with only one water inlet, do not connect the hose to the hot water supply. Connect to the cold water supply only.

Hand twisting faucet handle to connect hose on the side of a washing machine.

* Product images and features may contain advertising expressions and may differ from the actual product. Product appearance, specifications, etc. may change without prior notice for product improvement.

* All product images are photo cuts and may differ from the actual product. Product color may vary depending on monitor resolution, brightness settings, and computer specifications.

* The performance of the product may vary depending on the usage environment, and availability may vary by store.