Skip to Contents

How-to & Tips

Find help information for your LG product

Learn about product installation, maintenance, and troubleshooting using our search options.

[Fully Automatic] No Water Inlet - Inlet Filter Cleaning

  • Dispenser Issues
  • Does not dispense
  • Troubleshooting
  • Washing Machines
  • Last Updated 05/30/2014

No Water Inlet - Inlet Filter Cleaning


  • Cause
    1 st   : Error can occur if water pressure is low. Check water pressure.
    nd  : Filter in the connecting area of water supply hose eliminated precipitations in the hard water.

             When the filter is blocked, it will intervene with water supply. Close the water, disconnect the hose from

             washing machine and clean the filter before use.

  • How to clean filter
    Close the tap and unplug the power cord.
    ② Disconnect the water supply hose by rotating counter-clockwise and remove filter.

    [Separate filter using long nose plier]


   [Rust on filter]


   ③ Clean the debris on filter with flowing water and brush and put back in.


   [Clean with brush and assemble.]


   ※ Note : "IE“ error occurs when the water does not reach level within 8 minutes from the water supply started.



If the problem is not resolved, please call  LG Support representative on 1800-180 -9999 (Toll Free)



Not all features are available in one product
Not all products are available in the global market
The information is for general information purposes only and created for consumer awareness
Any reliance on information is strictly at its own risk
In no event LGEIL will be liable for any loss or damage including without limitation, indirect or consequential loss or   damage,

  or any loss or damage whatsoever arising from loss of data or profits arising out of or in connection with the use of this informational video.

The solutions provided herein  might vary based on the models, please verify before implementing.
No part of this text or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.
The information is provided free of costs and to serve end users.
The information is not meant for any claims or comparison with competition, but to facilitate the customer to understand  product features.



Article Feedback

Q1. Overall, how satisfied were you with the usefulness of this information?
Q1-1. Why were you dissatisfied withthe usefulness of this information?

Characters left : 500 / 500