We use cookies, including cookies from third parties, to enhance your user experience and the effectiveness of our marketing activities. These cookies are performance, analytics and advertising cookies, please see our Privacy and Cookie policy for further information. If you agree to all of our cookies select “Accept all” or select “Cookie Settings” to see which cookies we use and choose which ones you would like to accept.
This video explains common error codes that may appear on your LG
washing machine and how to fix them.
Error codes shown on the control panel are commonly linked to water
supply or drainage issues, an unbalanced load, motor overload, or other
operating problems.
In most cases, you can resolve them with simple checks, such as
inspecting the hoses, cleaning the filters, or redistributing the
laundry.
What Does the Error Code on My Washing Machine Mean?
Common Error Codes and Causes
- IE (Inlet Error): The tap may be turned off, the water supply hose may be kinked, or the inlet filter may be blocked, preventing the machine from filling properly.
- UE (Unbalance Error): The load may be too small or unevenly distributed, causing the drum to become unbalanced and preventing it from spinning properly.
- OE (Water Outlet Error): The drain hose may be kinked or blocked, or the drain pump filter may be clogged, preventing the machine from draining properly.
- LE (Motor Locked Error): The motor may be temporarily locked because the appliance is overloaded.
- FF (Frozen Failure): Water inside the water supply or drain hose, or the drain pump, may have frozen due to low temperatures.
How Can I Fix Each Error Code?
Common Error Codes and Causes
- IE (Inlet Error): Fully open the water tap and straighten any bends in the water supply hose. Remove and clean the filter inside the hose.
- UE (Unbalance Error): If the load is too small, add one or two similar items. If wet laundry is clumped together, redistribute it evenly inside the drum and restart the cycle.
- OE (Water Outlet Error): Check that the drain hose is not kinked or blocked. Remove any debris from the drain pump filter.
- LE (Motor Locked Error): Turn off the washing machine and wait approximately 30 minutes to allow the motor to cool down before restarting.
- FF (Frozen Failure): Pour warm water into the drum to help thaw the drain pump. Wrap the water supply hose with a towel soaked in warm water to thaw it.
Caution
- In freezing weather, drain any remaining water from the machine in advance using the manual drain tube to help prevent freezing inside the appliance
Frequently Asked Questions (FAQ)
- Q. What do ED or OP error codes mean?
- A. These are related to the ezDispense (automatic detergent dispensing) function. Please refer to the dedicated troubleshooting guide or video for this feature.
- Q. What should I do if the error code keeps appearing after troubleshooting?
- A. If the same error code continues to appear after following the recommended steps, the machine may need to be inspected. Unplug the washing machine and contact LG Support for further assistance.
This guide was created for all models, so the images or content may be different from your product.