We use cookies, including cookies from third parties, to enhance your user experience and the effectiveness of our marketing activities. These cookies are performance, analytics and advertising cookies, please see our Privacy and Cookie policy for further information. If you agree to all of our cookies select “Accept all” or select “Cookie Settings” to see which cookies we use and choose which ones you would like to accept.
Check the installation space and the moving route before purchasing or setting up your TV.
Follow safe handling steps during unboxing, lifting, and stand assembly to help prevent screen or product damage.
Please Note
- Be careful when opening the box with sharp knives, as they can damage the product.
- Do not press the screen panel with your fingers when moving the TV, as it may cause damage.
- Do not move the TV by yourself.
- When laying the TV down to assemble the stand, use a stable flat surface and make sure there are no objects underneath that could scratch or damage the screen.
- This information is for installation reference; for safe installation, please seek help from a professional consultant or installation expert.
- Images and some details may differ from your product depending on the model.
Why checking the space and route matters before installing a TV
TVs can be damaged during unboxing, lifting, or moving if the screen is pressed or the unit is handled incorrectly.
Installation can also be unsafe or unsuccessful if there is not enough clearance around the TV for ventilation and safe placement, or if the packaging cannot fit through doors, elevators, hallways, or stairs.
1. Risk of damage during unboxing and lifting
Sharp tools can scratch or cut the TV during unboxing.
Lifting by pressing the screen panel or lifting without supporting the bottom can damage the panel.
2. Insufficient clearance at the installation location
If the TV is installed too close to walls, the ceiling, or the floor, it may not meet the recommended spacing for safe placement.
3. The TV box may not fit through the moving route
The packaging box size can differ from the actual TV size.
If the route is too narrow or has tight corners, the TV may not be safely moved into your home.
How to prepare for a safe TV installation
Confirm the TV size on the LG Electronics website and measure your installation space and moving route before purchase or delivery.
Use safe handling methods during unboxing and setup, and ensure the recommended clearances are maintained for stand or wall-mounted installation.
Step 1. Confirm model size before purchase
Verify the size of the desired model on the LG Electronics website.
Use the size information as a reference for installation planning.
Step 2. Follow safe unboxing and handling precautions
When opening the box, use caution with sharp knives to avoid damaging the product.
To prevent damage, hold the protective film on both sides and lift while supporting the bottom of the TV with your other hand.
When moving the TV, do not press the screen panel with your fingers.
Do not move the TV by yourself.
When assembling the stand, lay the TV down on a table or flat surface and confirm there are no objects where you will place it.
Step 3. Check the installation location clearances
For a stand TV, ensure there is at least 10 cm (3.93 inches) of space between the TV and the ceiling and side walls.
For a wall-mounted TV, ensure there is at least 10 cm (3.93 inches) of space between the TV and the ceiling, floor, and side walls.
If wall mounting is difficult due to the environment, confirm the location can support safe installation before proceeding.
Step 4. Measure the moving route into your home
Check both the actual product size and the packaging box size, as they may vary by product and screen size.
Measure the route (elevator interior width/depth/height, entrance width, front door frame height and width when fully open, hallway narrowest width, stairway width/ceiling height/corner turning space).
For safe movement, allow a clearance of about 5 cm to 10 cm (1.9 inches to 3.9 inches) between the packaging box and the moving route.
Step 5. Use professional help when needed
If you are unsure about feasibility, wall-mount conditions, or safe handling, consult a professional consultant or installation expert.
FAQ
- Q. Why do I need to measure the route if I already know the TV size?
-
A. The packaging box size can be different from the actual TV size.
To move the product safely, you should confirm the narrowest points (doors, elevator, hallway, stairs) and keep about 5 cm to 10 cm of clearance between the box and the route.
- Q. What is the minimum clearance recommended around the TV during installation?
-
A. For a stand TV, keep at least 10 cm (3.93 inches) of space between the TV and the ceiling and side walls.
For a wall-mounted TV, keep at least 10 cm (3.93 inches) of space between the TV and the ceiling, floor, and side walls.
Still Need Help?
If the steps above did not resolve your issue, please visit the LG Electronics Support website. You can chat with our virtual assistant or schedule a service repair for further assistance.
※ Please note that service fees may apply for engineer visits if your product is out of warranty.