We use cookies, including cookies from third parties, to enhance your user experience and the effectiveness of our marketing activities. These cookies are performance, analytics and advertising cookies, please see our Privacy and Cookie policy for further information. If you agree to all of our cookies select “Accept all” or select “Cookie Settings” to see which cookies we use and choose which ones you would like to accept.
A short delay (about 1–5 seconds) before the picture appears can be normal while the LG TV recognizes broadcast or external input signals. If startup takes much longer or the screen stays black, check the Quick Start setting and confirm whether a software update has just completed.
Please Note
- Use the LG TV remote control when following these steps.
- Do not test power-on behavior using a set-top box remote.
- If the standby indicator flashes at power-on and then turns off, or if you only hear sound with no picture and the TV menus do not appear, contact LG Electronics service.
- If the screen does not appear for more than 10 seconds after turning on the TV, contact LG Electronics service.
A slow LG TV startup can occur while the TV checks signals or applies system changes
When you power on the TV, it may take a few seconds to initialize the system, detect connected devices, and lock onto broadcast or HDMI input signals. Startup can also take longer if Quick Start is disabled, or if the TV is completing a webOS software update after a restart.
1. Normal signal recognition at power-on
A 1–5 second delay can be normal while the TV recognizes broadcast signals or external device inputs and then outputs video and audio.
2. Quick Start is turned off
If Quick Start is off, the TV may take longer to start because it performs a fuller initialization at power-on.
3. webOS logo appears during startup
If the webOS logo/message appears and then the picture loads, the TV may be finishing a software update. This behavior can be normal after an update completes.
Try these steps when an LG TV turns on slowly
Step 1. Enable Quick Start to reduce power-on time
Setting: Settings > General > Additional Settings > Q Start+
1) Turn on the TV.
2) On the LG TV remote, press Settings.
3) Open the full settings menu, then go to Settings > General > Additional Settings > Q Start+.
4) Set Q Start+ to On.
Note: Menu names and order can vary by model. Enabling Quick Start may increase standby power consumption.
Step 2. If the webOS logo appears, wait for startup to complete
If you see the webOS logo/message and then the Home screen or last input appears, the TV may be completing a software update. This is typically normal.
If the screen remains blank for more than 10 seconds, contact LG Electronics service for inspection.
Step 3. Check for symptoms that require service
Contact LG Electronics service if any of the following occur:
- The standby indicator at the bottom flashes when the TV is turned on and then turns off.
- You can hear sound but there is no picture, and pressing Settings/Menu or Volume on the LG TV remote does not display anything on the screen.
FAQ
- Q. How long should it normally take for an LG TV to turn on?
- A. In many cases, it can take about 1–5 seconds for the TV to power on and display the picture while it recognizes broadcast or external input signals.
- Q. Does enabling Quick Start affect anything besides startup speed?
- A. Yes. Quick Start can reduce power-on time, but it may increase standby power consumption.
Still Need Help?
If the steps above did not resolve your issue, please visit the LG Electronics Support website. You can chat with our virtual assistant or schedule a service repair for further assistance.
※ Please note that service fees may apply for engineer visits if your product is out of warranty.